Buy spares and accessories online

Cobalt standard

Cobalt Standards block, Ideal for Quant optimization in INCA and Aztec. 5mm diameter x 5mm deep brass block.

ID 51-1606-001

$ 320.00

In Stock 3

Ink pen for SEM

Fine point writing pen which leaves a mark that can be read in the electron beam of the SEM.

ID 51-1625-0010

$ 8.02

In Stock 7

Five slide mailer

Moulded polythene slide box with a snap-top lid, They are perfect for analysis kits.

ID 51-1625-0016

$ 3.34

In Stock 7

AutoProbe™ 300/400 Probe Tips for FEI SDB Front Port (Box of 20)

Custom made OmniProbe AutoProbe™ 300 400 Probe Tips for FEI SDB Front Port. In-situ width (Tungsten) needle with stainless steel shank. Supplied in a box of 20.

ID PT-0001.14.01

$ 790.00

Quantity Discounts

Buy 5-9 items ($ 671.50 each)
Buy 10+ items ($ 592.50 each)

In Stock 4

Conductive carbon discs (Roll of 250)

Conductive carbon adhesive tabs with a thin film of strong adhesive, approximately 12.5mm diameter. Over 99% transparent to EDS, with very small amounts of nickel.

ID 51-1625-0162

$ 96.05

In Stock 1

Quantifoil 400 Mesh Gold R1.2/1.3um dia - Holey Carbon Films (Pack of 10)

Quantifoil 1.2um dia (1.3um) 200 Mesh Copper (Pack of 10)
Quantifoils are supplied as 10 grids in this pack.

ID 51-1625-0371

$ 284.10

Pre Order Now

Quantifoil 200 Mesh Gold R2/2µm - Holey Carbon Films

Quantifoil 2um dia (2um) 200 Mesh Gold.
Quantifoils are supplied as 10 grids in this pack.

ID 51-1625-0074

$ 251.96

In Stock 1

Sample Holder Optical (Optistat 15mm clear) SH3 (59-DDZ1888)

Sample Holder Optical (Optistat 15mm clear) SH3 - Supplied unwired. Diameter:19mm, Overall Length: 35mm, Optical Clear Dia: 15mm

ID A7-111

$ 420.00

Pre Order Now

Shorter pin for all Zeiss/LEO 1500 SEM, FESEM & FIB systems

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0624

$ 100.98

Pre Order Now

Double Connector Housing with Nuts / Rings (59-ZZZ1007n)

Double connector housing and nuts/rings

ID SP-074

$ 563.00

Pre Order Now

Spectrotabs SEM conductive tabs 12mm dia (120 Pack)

Spectro high purity conductive carbon tabs have been a standard for quality carbon tabs for many years with smooth, clean surfaces for use in SEM mounting and other diverse applications including gunshot residue analysis. Spectrotabs have a much lower level of impurities than standard carbon (Leit) tabs, avoiding anomalous results during X-ray analysis of small particles and powders. 12mm width, come in a pack of 100.

ID 51-1625-0095

$ 66.77

In Stock 3

Microstat N2 INTERFACE PLATE (59-PSN0376)

Microstat DN2 interface plate used to mount Microstat N onto microscope translation stage.

ID SP-055

$ 846.00

Pre Order Now

Microstat HR2 Top Plate With Spec WF 25mm Clear Access - WOVC15HR2 (59-A9-935)

Microstat HR2 Top Plate With Spec WF 25mm Clear Access (WOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Spectrosil WF window.

ID A9-935

$ 1,135.00

Pre Order Now

High Resolution Au-C Test on 12.5mm Pin Stub

ID 51-1625-0148

$ 198.57

$ 283.67

In Stock 5

Tru-Block Eye Shields - Standard

Light entering your eyes from the side can interfere with what you want to see in microscopy in general, and fluorescence microscopy in particular. Eye cups are available, but the standard ones don't extend far from the microscope and don't do a good job as ambient light increases. Our soft, molded rubber high-sided microscope eye shields are the answer.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0587

$ 31.54

Pre Order Now

Middle Window Retaining Clip CF/DN Series (59-ZZZ5010)

Middle Window Retaining Clip CF/DN Series

ID A9-643

$ 44.99

Pre Order Now

Universal Tin on Carbon

Universal resolution test specimen with a particle size range from approximately <5nm - 30um. This tin on carbon test specimen has a very wide size range of tin spheres which give high contrast when imaged in the SEM.

ID 51-1625-0551

$ 144.85

$ 206.93

In Stock 3

4 Post Omniprobe® Copper Lift-out grids (Box of 100)

Box of 100 Omniprobe^® 4 post copper TEM lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, and have lower profile sides for easier access to outermost posts.

ID GRD-0001.10.01-01

$ 146.00

Quantity Discounts

Buy 5-9 items ($ 124.10 each)
Buy 10+ items ($ 109.50 each)

In Stock 15

X-Ray Fluorescence Universal Set (20 elements)

These standards are supplied as ¼" (33mm) diameter pressed pellets or metal foils, and are prepared from selected high purity elements and compounds to ensure interference free-spectra. They are suitable for use by experienced spectroscopists as well as staff training.

This item is on pre-order and will take around 1-2 weeks to arrive.

ID 51-1625-0683

$ 2,210.00

Pre Order Now

Microstat HR2 Top Plate

Microstat HR2 Top Plate With Spec WF 10mm Clear Access (WOVC05HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 0.5mm thick Spectrosil B window.

ID A9-931

$ 1,120.00

Pre Order Now

LaB6 Filament 90/15 on FEI/Philips Base (not XL30)

Kimball Physics single crystal lanthanum hexaboride (LaB6) cathodes are available for most makes of electron microscopes and other electron beam instruments.

ID 51-1625-0240

$ 1,628.12

$ 2,325.89

In Stock 3

Parallel Bar 50 Mesh TEM Support Grids (Copper)

50 mesh, parallel bar, 3.05mm diameter TEM grids. Also available in Nickel

ID 51-1625-0856

$ 26.40

Pre Order Now

4 Post Omniprobe® Moly Lift-Out Grids (Box of 25)

A box of 25 Omniprobe® 4-post lift-out grids for in-situ lift-out. These grids include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with "V" shaped alignment surfaces. Made from Molybdenum.

ID GRD-0001.06.01

$ 352.00

Quantity Discounts

Buy 5-9 items ($ 299.20 each)
Buy 10+ items ($ 264.00 each)

In Stock 16

MicrostatHR2 Circular transmission mounting plate (59-P280646)

MicrostatHR2 Circular transmission mounting plate.

ID SP-020

$ 1,132.00

Pre Order Now

Microstat HR2 Top Plate

Microstat HR2 - Top Plate With Crystalline Z-cut Quartz 25mm (Clear Access). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Crystalline Z-cut Quartz window.

ID A9-943

$ 1,465.00

Pre Order Now

15MM AFM SPECIMEN DISC (10 Pack)

15mm Stainless Steel Specimen Disc - 15mm (10 Pack)

ID 080.122

$ 30.00

Pre Order Now

O'RING BS472 VIT 6.99x582.68MM

O'RING FOR ELECTRODE

ID 94-G-SEL-O-V-472C

$ 71.02

In Stock 2

TEM, Grid Dual Holder, Al

Post Base TEM Grid Holder made from aluminum (Al - non-magnetic).

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0678

$ 1,227.92

Pre Order Now

Silicon Half Grids (100 Pack)

FIB Lift-Out TEM Grids, Simple silicon half ring grids

ID GRD-0002.01.100

$ 1,469.00

Pre Order Now

Quantifoil 200 Mesh Gold R2/4um - Circular Holey Carbon Films (10 Pack)

Quantifoil 200 Mesh Gold R2/4um - Circular Holey Carbon Films. Circular, hole size 2um dia, separation 4um. This is a pack of 10.

ID 51-1625-0217

$ 157.85

Pre Order Now

Feature Standards Block (4 standards)

ID 51-1606-046

$ 2,320.00

Pre Order Now

Silicon Wafer 4" (102mm) P Type

These 2" (50.8mm), 3" (76.2mm) and 4" (102mm) diameter silicon wafers can be used either as substrates for thin film research or to make small silicon substrates by dicing the wafer into smaller pieces using a scriber.

ID 51-1625-0433

$ 81.97

Pre Order Now

AR-PPLN TEST SAMPLE - MOUNTED ON GLASS SLIDE

Periodically Poled Lithium Niobate (LiNbO3) PFM Test Sample

ID 900.242

$ 380.00

Pre Order Now

Spectrosil WF Quartz Inner Window

Spectrosil WF Quartz Inner Window (CF/DN old style)

ID A9-123

$ 906.00

Pre Order Now

5 Post Omniprobe® Copper Lift-Out Grids (Box of 100)

5 post Omniprobe^® copper lift-out TEM grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, all with vertical bar attachment surfaces. They now come with lower profile sides for easier access to outermost posts.

ID GRD-0001.09.01

$ 156.00

Quantity Discounts

Buy 5-9 items ($ 132.60 each)
Buy 10+ items ($ 117.00 each)

In Stock 37

3 Post Omniprobe® Copper Grids, Shallow downset (Box of 100)

Omniprobe^®3 post copper TEM lift-out grids which have been designed for in-situ lift-out. These grids have been designed for optimum access and include multiple indexed mounting locations with both vertical bars and “V” shaped attachment surfaces and have a shallower downset than other grids. 3mm diameter.

ID GRD-0001.08.01-01

$ 146.00

Quantity Discounts

Buy 5-9 items ($ 124.10 each)
Buy 10+ items ($ 109.50 each)

Pre Order Now

Platinum Round Coverglasses (12mm, #1)

Made of a water-white colorless borosilicate glass, with an optimum hydrolytic resistance. Ultra-thin. Performs exceptionally well on all automated glass coverslippers. Available in multiple dimensions.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0669

$ 527.80

Pre Order Now

Serialised SEM Specimen Stub with Leit Carbon Tab in tube (10 Pack)

Serialised standard 12.5mm dia aluminium pin stubs with pre-mounted leit carbon tab in a tube. Each stub has a unique serial number for sample identification. Suitable for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. Also come in a 50 pack. (51-1625-0740)

ID 51-1625-0809

$ 45.57

Pre Order Now

TEM, Grid Dual Holder, SS

Post Base TEM Grid Holder. Stainless steel (SS - very slightly magnetic), can affect imaging in UHS mode.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0679

$ 1,252.49

Pre Order Now

Spares Kits for Microstat range of Optical Cryostats

Spares kit for Microstat OVC containing O rings & Screws. These kits are used to service and maintain your optical cryostat to ensure optimal performance.

ID A4-851

$ 10,080.00

$ 14,400.00

In Stock 2

Plain Glass Slides, 76mm x 26mm, 1.2mm - 1.5mm (Pack of 50)

Plain Glass Microscope Slides, 76mm x 26mm, 1.2mm - 1.5mm (Pack of 50)

ID 51-1625-0176

$ 33.92

Pre Order Now

SR Optistat Sample Rod (59-A100491) supplied with standard Thermal link (A7-103)

SR Optistat Sample Rod supplied with standard Thermal link (A7-103). This is our standard support rod.

ID A7-101

$ 1,619.00

Pre Order Now

Silicon nitride membranes - 200um substrate thickness, multi-frame array (7x7 array)

200µm substrate thickness, multi-frame array (7 x 7 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes.

ID 51-1625-0709

$ 642.82

Pre Order Now

AutoProbe™ 400L Low-Magnetic probe tips for in-situ tip exchange (non-Helios)

Low-Magnetic 11mm custom etch design. Custom made In-situ probe tips for OmniProbe® AutoProbe™ 300/400L systems for tip exchange. Tungsten tip with stainless steel shank, tip radius is 0.5µm with an 8-10° taper angle.

ID PT-0001.16.01

$ 1,036.00

Quantity Discounts

Buy 10+ items ($ 777.00 each)

In Stock 10

Molybdenum Aperture (10mm dia x 0.1mm)

10mm dia, 0.1mm thick. Molybdenum High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.

ID 51-1625-0366

$ 239.00

In Stock 3

SEM Specimen Stubs, 25mm dia, double 90° chamfer, 9.5mm pin

SEM Specimen Stubs for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments.

ID 51-1625-0805

$ 17.32

In Stock 2

SEM Carbon Tabs with Aluminium backing 12mm (100 Pack)

Highly electrically conductive carbon adhesive tabs with a thin aluminium foil (30µm) core suitable for SEM or EDX applications and ideal for automated analysis of particles. These tabs have a smooth surface that is superior to standard woven carbon tape for SEM and EDS analysis of powders and small fibers.

ID 51-1625-0134

$ 67.06

In Stock 3