This product is a direct replacement to the discontinued Kelvin Nanotechnology KNT-STHM.
NOTICE: This product is recommended for qualitative or relative measurements of variations in local temperature or thermal conductivity up to 150 C. It is not recommend for quantitative or accurate local temperature measurements, especially exceeding 60 C, as results are generally inconsistent even if calibration is attempted against known sample temperatures.
Aluminium conditioning block to fit 26mm diameter vials in 28 spaces.
20% Chloroform Standard Sample, supplied in a sealed degassed 5mm diameter NMR tube.
18mm diameter FEP sample tube with PTFE end plugs
Caps for use with the 23mm snap top vials (57-LE1011) supplied in a bag of 190.
This product is a direct replacement to the discontinued OLYMPUS AC200TS
Silicon probe with visible apex tip for soft tapping, force modulation, or bimodal imaging on medium to hard samples. Each pack contains 10 probes.
A set of 3 synthetic calibration samples. 10mm in diameter.
Microfleece Pipe Cleaners sold in a pack of 50, 9mm diameter.
PTFE plug to pack the sample to the correct height.
Delrin tool for removing 18mm and 26mm stoppers from FEP tube assemblies.
18mm diameter sealed NMR tube. To measure hydrogen signal.
A set of 4 synthetic calibration maintenance samples. 26mm in diameter.
NOTICE: This product is a direct replacement to the discontinued Adama Innovations AD-40-AS
With an apex sharp conductive single crystal diamond tip for high resolution topography and electrical imaging with long tip lifetime. Each pack contains 5 probes.
This product is a direct replacement to the discontinued OLYMPUS AC240TS-R3
Tapping / Non-Contact / Force Modulation - Silicon Probe with visible apex tip.
Each pack contains 10 probes
Aluminium conditioning block to fit 10mm diameter tubes. It has 10 spaces for 26mm diameter tubes.
Aluminium conditioning block to fit 26mm diameter tubes. It has 25 spaces for 26mm diameter tubes, 5 spaces for 18mm diameter tubes.
Aluminium conditioning block to fit 26mm diameter tubes in 12 spaces.
80% Benzene in Acetone standard sample supplied in a sealed degassed 5mm diameter NMR tube.
PTFE tool for inserting and removing the 18mm PTFE/FEP Sample Cartridge.
This product is a direct replacement to the discontinued OLYMPUS AC160TS-R3
Tapping / Non-Contact - Silicon Probe with visible apex tip.
Each pack contains 10 probes.
PTFE tool for inserting and removing the 26mm PTFE/FEP Sample Cartridges.
26mm diameter FEP sample tube with PTFE end plugs for use with the MQC-23.
A Doped Water standard sample supplied in a sealed degassed 5mm diameter NMR tube.
23mm Flat Bottom Snap Top Vials, supplied in a box of 190. Caps are supplied separately.
Premium 8" long, 5mm diameter NMR tubes, 200MHz frequency, supplied in a pack of 50 with caps.
Screw Cap for Shorty Vials for 18mm probe 52-LE1086.
23mm diameter x 85mm long borosilicate glass vials, supplied in a box of 144.
Fast scanning and high-resolution imaging probe with visible apex tip ideal for imaging semiconductor samples. Each pack contains 10 probes.
Aluminium conditioning block to fit 26mm diameter tubes in 28 spaces.
PTFE tool for packing sample to the correct height in the sample vial.
Aluminium conditioning block to fit 26mm diameter vials.
Aluminium conditioning block to fit 18mm diameter tubes in 12 spaces.
Polypropylene plug to pack the sample to the correct height.
17mm diameter x 38mm long borosilicate glass vials, supplied in a box of 200.
PRODUCTS
TRAINING
SUPPORT
SOFTWARE
New.svg)
Offers
