Oxford Instruments US eStore - Consumables, Accessories, Spares, Software and Training for a range of Applications

Gold Plated Tweezers (Straight Tips) product photo

Gold plated tweezers - Anti-Acid/Anti-Mag Stainless Steel. The tips are straight, extra fine (0.08mm), superior finish. Overall Length:110mm. They are manufactured from anti-acid, non-magnetic stainless steel and are then plated with gold.

ID 51-1625-0963

$ 42.40

$ 53.00 20% OFF

AFM/STM Cantilever Tweezers

AFM/STM Cantilever Tweezers made from titanium, a useful tools for securely and easily picking up AFM / SPM cantilevers. Easily grasp magnetic AFM/STM cantilevers / probes with these precise titanium, absolutely non-magnetic tweezers. 4-5/8" (117mm) long.

ID 51-1625-0985

$ 81.00

$ 90.00 10% OFF

Disc Carrier for AFM

These disc carriers provide practical dust-free damage free storage for 12mm and 15mm SPM discs. Retrieve your discs from their carrier with the magnetic pick-up tool 51-1625-0921

ID 51-1625-0949

$ 31.20

$ 39.00 20% OFF

Highly Ordered Pyrolytic Graphite (HOPG)

HOPG is widely used as a substrate for specimens to be examined in scanning probe microscopy. It is also used as a calibration specimen and cleaves almost like mica because of its layered structure. (HOPG 3.5 ± 1.5 Mosaic Spread)

ID 51-1625-0744

$ 172.00

$ 215.00 20% OFF

HOPG ZYB - Puck Mounted

HOPG ZYB grade: 6x6x2mm mounted on 15mm electrical puck [448.140]

Mosaic spread: 0.8° +/- 0.2°

ID 823.011

$ 288.00

Jupiter - ORCA Test Resistor (Standard Single Gain 2nA/V 500M)

Standard Single Gain - 2nA/V (500M) wire assembly provides 500 Mohm of resistance.

It can also be used to test the 2nA/V sensitivty of standard single gain ORCA holder.

Designed for Jupiter AFM.

ID 448.167

$ 24.80

$ 31.00 20% OFF

Jupiter - Vaccum Tubing (¼" OD x .166 ID)

Clear polyurethane tubing for Jupiter vacuum lines. Sold in 240 inches (609 cm) lengths.

ID 231.062

$ 20.00

$ 25.00 20% OFF

15mm Gold Coated Specimen Discs for AFM (5 pack)

These metal 15mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0617

$ 69.30

$ 77.00 10% OFF

10mm Gold Coated Specimen Discs for AFM (5 pack)

These metal 10mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0612

$ 56.00

$ 70.00 20% OFF

Electrical Sample Puck (15mm)

15mm puck with integrated magnetic wire for general use with electrical meausrment sample mounting.

Adhere samples to puck with conductive silver paint [290.103]. Sold in packets of 3.

ID 448.140

$ 82.40

$ 103.00 20% OFF

Jupiter - ORCA Test Resistor (Standard Dual Gain 1uA/V 1G)

Wire assembly provides 1 GOhm of resistance

It can also be used to test the 1nA/V sensitivty of standard dual gain ORCA holder.

Designed for Jupiter AFM.

ID 448.222

$ 24.80

$ 31.00 20% OFF

Jupiter - Probe Holder, Clip Screw (Main) NEW MODEL

Screw used to tighten/loosen the probe clip for mounting AFM probes in the holder (2024+)

ID 001.FHCSP.SST

$ 4.12

$ 5.15 20% OFF

HOPG ZYA Grade (12 x 12 x 2mm) 0.4° +/- 0.1° Sample Assembly

Highly Oriented Pyrolytic Graphite (HOPG) ZYA grade sample assembly

ID 823.009

$ 804.00

$ 1,005.00 20% OFF

Carbon PEEK fibre replacement tip tweezers

Carbon PEEK fibre tweezers. A pair of high precision sainless steel tweezers with replaceable plastic tips made from high performance carbon PEEK (polyetheretherketone) tips. Choose your tweezer tip from the dropdown menu:

ID 51-1625-1429

$ 31.60

$ 39.50 20% OFF

Magnetic Pickup Tool for AFM

This convenient magnetic tool comes in handy when you are picking up and manoeuvring SPM discs without damage to mounted specimens.

ID 51-1625-0921

$ 14.40

$ 18.00 20% OFF

AFM Mica Discs, V1 (10 Pack)

High quality V1 muscovite mica disks that come interleaved in a pack of 10 in four different diameters used in AFM calibration. (15mm size)

ID 51-1625-0952

$ 36.00

$ 45.00 20% OFF

AFM Specimen Disc (10 Pack)

Stainless Steel Specimen Discs in 12mm & 15mm (10 Pack). Choose your size disc from the dropdown menu.

ID 080.105

$ 28.80

$ 36.00 20% OFF

HOPG ZYH - Puck Mounted

HOPG ZYH grade: 6x6x2mm mounted on 15mm electrical puck (448.140)

Mosaic spread: 3.5° +/- 1.5°

ID 823.027

$ 108.00

HOPG ZYA - Puck Mounted

HOPG ZYA grade: 12x12x2mm mounted on 15mm electrical puck [448.140]

Mosaic spread: 0.4° +/- 0.1°

ID 823.026

$ 803.00

Jupiter - Vaccum Chuck, Scanner Secure Screw

Screw used to fasten Jupiter vacuum chuck to XY scanner.

Sold in packets of 5.

ID 222.211

$ 8.00

$ 10.00 20% OFF

12mm Gold Coated Specimen Discs for AFM (5 pack)

These metal 12mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

ID 51-1625-0613

$ 63.00

$ 70.00 10% OFF

Vertical Sample Clamp (15mm)

Vertical Sample Clamp - An adjustable mount for vertically clamping samples up to 2mm thick

ID 900.184

$ 283.00

HOPG ZYH - Unmounted

HOPG ZYH grade: 6x6x2mm unmounted.

Mosaic spread: 3.5° +/- 1.5°

ID 206.094

$ 77.00

A/R CALIBRATION GRATING - UNMOUNTED

XYZ Calibration Reference Sample for AFM/SPM

ID 900.239

$ 325.60

$ 407.00 20% OFF

Jupiter - Air Tubing (¼" OD x .166 ID)

Blue polyurethane tubing for Jupiter air lines. Sold in 240 inches (609 cm) lengths.

ID 231.063

$ 20.00

$ 25.00 20% OFF

Jupiter - ORCA Test Resistor (Standard Dual Gain 1uA/V 1M)

Wire assembly provides 1 MOhm of resistance

It can also be used to test the 1uA/V sensitivty of standard dual gain ORCA holder.

Designed for Jupiter AFM.

ID 448.221

$ 24.80

$ 31.00 20% OFF

Jupiter Probe Holder - Clip Screw (Sides)

Screw used to tighten/loosen the probe clip for mounting AFM probes in the holder (2024+)

ID 002.FHCS.M2X4SST

$ 4.12

$ 5.15 20% OFF

Adhesive Tabs

Adhesive tab sheet for mounting AFM samples.

ID 249.033

$ 3.00

Conductive Silver Paint

Fast drying, alcohol based silver conductive paint for sample mounting and electrical continuity.

ID 290.109

$ 155.00

7-SA Technik Tweezers - Curved super fine points

These tweezers with straight ultra fine tips with curved super fine points are used for assembly work. Length: 4 1/4" (110mm). Made from 316 Stainless Steel Construction that is Anti-Magnetic and Anti-Acid.

ID 290.102

$ 15.00

AR-PPLN TEST SAMPLE - MOUNTED ON GLASS SLIDE

Periodically Poled Lithium Niobate (LiNbO3) PFM Test Sample

ID 900.242

$ 372.00

$ 465.00 20% OFF

Gold Plated Tweezers (Angled extra fine tips)

Gold plated tweezers - Anti-Acid/Anti-Mag Stainless Steel. The tips are bent, extra fine, superior finish. Overall Length:110mm. They are manufactured from anti-acid, non-magnetic stainless steel and are then plated with gold.

ID 51-1625-0968

$ 46.40

$ 58.00 20% OFF

Mica Disk, 15mm, V1

High quality V1 muscovite mica disks - pack of 20
15mm diameter, 0.15mm thick

ID 080.172

$ 156.00

$ 195.00 20% OFF

A/R CALIBRATION GRATING - STEEL PUCK MOUNTED

XYZ Calibration Reference Sample for AFM/SPM

ID 900.237

$ 325.60

$ 407.00 20% OFF

3C-SA Technik Tweezer - Tapered, Round Edge, Blunt

3C SA Technik Tweezer with long and narrow, straight point tips to provide extended reach and access to confined areas. Length: 4 1/4" (110mm). Made from 316 Stainless Steel Construction that is Anti-Magnetic and Anti-Acid.

ID 290.103

$ 12.00

$ 15.00 20% OFF

Phillips WIHA Screwdriver #0

#0 Phillips screwdriver. Can be used for fastening main probe clip screw on the Jupiter AFM probe holder and also for other general purpose use.

ID 290.174

$ 12.00

Jupiter - Probe Holder, Clip Screw (Main) PREVIOUS MODEL

Screw used to tighten/loosen the probe clip for mounting AFM probes in the OLD STYLE holder (pre-2024)

ID 111.738

$ 20.80

$ 26.00 20% OFF

A/R CALIBRATION GRATING - GLASS SLIDE MOUNTED

XYZ Calibration Reference Sample for AFM/SPM

ID 900.238

$ 325.60

$ 407.00 20% OFF

SRAM - Mounted

SRAM (Static Random Access Memory) reference sample mounted on 15mm puck.

ID 823.021

$ 250.00

AFM/STM Metal Specimen Discs, 20mm (50 Pack)

High quality magnetic stainless steel (alloy 430) discs for Atomic Force Microscopy. They measure 20mm and come in a 50 pack.

ID 51-1625-1793

$ 85.60

$ 107.00 20% OFF

Cryo-AFM Diamond Knife

Extremely smooth sample surfaces for the best possible structure preservation. The high quality Diatome diamond knives are not just perfect for producing ultra thin and semi-thin sections, but also for surfacing sectioning of all kinds of biological and industrial specimens.

ID 51-1625-0686

$ 3,544.00

$ 4,430.00 20% OFF

HOPG ZYB - Unmounted

HOPG ZYB grade: 6x6x2mm unmounted.

Mosaic spread: 0.8° +/- 0.2°.

ID 206.093

$ 258.00

Phillips WIHA Screwdriver #00

#00 Phillips screwdriver. Can be used for fastening the side & misc screws on the Jupiter AFM probe holder and also for other general purpose use.

ID 290.106

$ 12.00

AR-PPLN TEST SAMPLE - MOUNTED ON 15MM SAMPLE PUCK

Periodically Poled Lithium Niobate (LiNbO3) PFM Test Sample

ID 900.241

$ 372.00

$ 465.00 20% OFF

AR-PPLN TEST SAMPLE - UNMOUNTED

Periodically Poled Lithium Niobate (LiNbO3) PFM Test Sample

ID 900.243

$ 296.00

$ 370.00 20% OFF

2A-SA Technik Tweezer - Tapered, Round Edge, Blunt

2A SA Technik Tweezer with straight, rounded edge, blunt tips. Provides large flat gripping surface.

Length: 4 1/2 in | 115mm. Made from 316 Stainless Steel Construction that is Anti-Magnetic and Anti-Acid.

ID 290.101

$ 12.00

$ 15.00 20% OFF

Storage box for metal AFM/SPM discs

These efficient AFM storage boxes are available with magnetic strips to hold metal SPM discs. They both measure 75 x 120 x 32mm. This AFM/SPM Disc Storage Box can fit 2 x 20mm Strips (15mm discs)

ID 51-1625-0855

$ 27.20

$ 34.00 20% OFF

HOPG ZYA - Unmounted

HOPG ZYA grade sample, unmounted. A premium calibration standard and atomically smooth substrate typically used in AFM, STM, and X-ray diffraction.

Mosaic spread: 0.4° +/- 0.1°

ID 206.038

$ 773.00

Phillips WIHA Screwdriver (2mm Flat Tip)

Phillips WIHA screwdriver. Can be used for fastening screws on the Jupiter AFM probe holder and also for other general purpose use. Has a 2mm flat head.

ID 290.110

$ 12.00

Jupiter - Vaccum Chuck, Sealing Screw

Screw used to fasten Jupiter vacuum chuck to XY scanner. Sold in packets of 5.

ID 222.220

$ 12.00

$ 15.00 20% OFF

It appears that your browser has cookies disabled.

ATOMIC FORCE MICROSCOPY

Manufacturer

By Category

In Stock

Featured Products

SELECT YOUR REGION

MY ACCOUNT