Buy spares and accessories online

Aeroquip Fitting - Dust Plug 5400-S8-8 (59-A10-108)

Aeroquip Fitting - Dust Plug (5400-S8-8) An end coupling for Aeroquip, used in Helium recirculation systems.

ID SP-008

$ 40.00

Pre Order Now

Cryogenic Ribbon Cable Loom 1. Constantan (59-PAZ0031)

Cryogenic Ribbon Cable Loom 1, Constantan with Male 25 way MDM connector.

ID A8-301

$ 1,958.00

In Stock 1

MERCURY Assembly Pressure Sensor Card (59-PNV0007)

Pressure sensor card for Mercury intruments - Plug and go card for Oxford Instruments Mercury Instrumentation. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID SP-015

$ 1,145.00

Pre Order Now

Trtion experimental loom 12 T/P CONST. (59-PAZ0063)

Triton experimental loom 12 twisted pairs constantan.

ID SP-082

$ 1,807.00

Pre Order Now

Triton 40mm LOS hardware kit 6 SMA (59-Z211553)

Triton 40mm LOS hardware kit 6 SMA containing everything needed to upgrade your hardware.

ID SP-119

$ 5,074.00

Pre Order Now

TUBE ALUMINA ICP65

ICP 65 TUBE

ID 94-MD00C26550

$ 2,078.29

In Stock 1

O'RING BS112 VIT 2.62x12.37MM

O'RING FOR ELECTRODE LEGS

ID 94-G-SEL-O-V-112

$ 1.40

In Stock 2

Polythene Olives 9.5mm ID - pack of 10 (59-H1-401)

Polythene Olives 9.5mm ID (pack of 10)

ID H1-401

$ 19.60

$ 28.00

In Stock 2

LLT750/10 - Automated Transfer Tube: 1.0m Dewar Leg, 1.3m Flexible Section (59-ZDZ2594)

LLT750/10 - An Automated Low Loss Transfer Tube with automatic needle valve control option: 1.0m Dewar Leg, 1.3m Flexible Section

ID H7-307

$ 7,388.00

Pre Order Now

Blanking Plate for 10-Pin seal (59-DCZ0291)

Blanking Plate for 10-Pin seal to protect from dust and moisture.

ID A1-112

$ 80.00

Pre Order Now

LLT700/13 - Transfer Tube: 1.3m Dewar Leg. 1.3m Flexible Section (59-DSD0133)

LLT700/13 - A Low Loss Transfer tube (LLT) for vertical feed cryostats: 1.3m Dewar Leg, 1.3m Flexible Section

ID H7-304

$ 6,149.00

Pre Order Now

24-Pin Fischer Plug, female (59-EPF5093) - Compatible with A1-224

24-Pin Fischer Plug - Female which is compatible with A1-224. 24 Pin contacts dia 0.7mm, Rated voltage r.m.s. (V) ≤250, Current (A): 3.5.

They are hermetically sealed and have an o-ring.

ID A1-223

$ 288.00

Pre Order Now

Solenoid Magnet Current Leads 2 x 10mmØ clamp 6mtr 120amp (59-CBZ3515)

Standard Magnet Current Leads - 2 x 10mmØ clamp 6mtr 120amp. A set of current leads suitable for systems used to connect the MercuryiPS magnet power supply to 10mm diameter current lead terminals on the cryostat.

ID SP-140

$ 581.00

Pre Order Now

Connector 25-way MDM plug (59-EPM0928)

Connector 25-way MDM plug. Micro-D metal (MDM) MDM coaxial / power.

ID A8-402

$ 221.20

$ 316.00

In Stock 1

ILM Probe 6m Helium Lead with Fischer Connector (59-CNC6700)

Helium level probe lead for connecting helium level probes to ILM or Mercury. This lead provides connection between the ILM series level meter and the probe. Supplied with a Fischer connector.

ID E2-821

$ 292.60

$ 418.00

In Stock 1

GSR Validation Standard 150nm Au

ID 51-1606-016

$ 610.00

Pre Order Now

Co-axial Plug (59-PCZ0002)

RF Subminature Coaxial Plug SMB - Straight suitable for ECO316, ECO316D, RG174, RG174FTX, RG179, RG187, RG188 and RG316 cable.

ID A1-114

$ 248.00

Pre Order Now

Aeroquip Fitting - Male Coupling 5400-S2-8 (59-A10-109)

Aeroquip Fitting - Male Coupling (5400-S2-8)

ID A10-109

$ 199.00

Pre Order Now

Triton Bottom loading probe Thumb Nut M4 (59-FHZ0023)

Triton bottom loading load lock (BLLL) thumb nut M4

ID SP-062

$ 22.00

Pre Order Now

PIivoting Grid Holder 48° STUB

ID 51-1151-002

$ 4,750.00

Pre Order Now

PLG TABLE TOP ELECTR LWR

Electrode coverplate plugs

ID 94-G-MD40511

$ 45.05

In Stock 8

ITC Series Input Lead 3m - 10 pin Seal Connectors (59-CQB0090)

ITC Series Input Lead 3m - 10 pin Seal Connectors

ID E5-801

$ 150.00

In Stock 1

Watlow Heaters 40V. 80W. Dia = 0.250" (59-PFA0006)

Watlow Heaters 40V. 80W. Dia = 0.250". Length = 1.25

ID A6-306

$ 170.00

Pre Order Now

24-Pin Fischer Socket, female, hermatic (59-PCS0039) - Compatible with A1-203

24-Pin Fischer Socket (Hermatic) - Female which is compatible with A1-203 - Panel, Front mounted. 24 Pin contacts dia 0.7mm, Rated voltage r.m.s. (V) ≤250, Current (A): 3.5

ID A1-204

$ 369.00

In Stock 3

Omniprobe® Low Profile Dual TEM Grid Holder

The Omniprobe® Low Profile Double TEM Grid Holder holds two lift-out grids and has a spring-loaded jaw for easy unloading.

ID TGH-0001.23.00

$ 1,050.00

In Stock 3

Connector 25-way MDM socket (59-EPM0828)

Connector 25-way MDM socket. Micro-D metal (MDM) MDM coaxial / power.

ID A8-401

$ 265.00

In Stock 1

Solenoid Magnet Current Leads 2 x 8mmØ clamp 6m 120amp (59-CBZ3525_6M)

Standard Magnet Current Leads - 2 x 8mmØ clamp 6 mtr 120amp. A set (pair) of current leads suitable for systems used to connect the MercuryiPS magnet power supply to 8mm diameter current lead terminals on the cryostat.

ID SP-141

$ 592.00

Pre Order Now

4K High Vacuum Grease Apiezon 'N' 25g Tube (59-TGZ0001)

High Vacuum Grease Apiezon 'N' 25g. Apiezon N Cryogenic 4K High Vacuum Grease 5x10-9 Torr at 20°, Silicone & Halogene Free. For low vapor pressure sealing and lubrication in high vacuum applications.

ID A4-902

$ 317.00

In Stock 5

STUDDING A4 ST M04.00 (59-FSD0003)

Triton bottom loading load lock (BLLL) Studding M4

ID SP-063

$ 11.00

Pre Order Now

Blanking Plate for Sub-miniature Co-axial Plug (59-P50960)

Blanking Plate for Sub-miniature Co-axial Plug (which is product code: A1-114) to ensure paramount protection from moisture and dust.

ID A1-116

$ 104.00

Pre Order Now

Compressor Adsorber Cryomech (59-HZZ0006)

Compressor Adsorber Cryomech (Compressor Model CP900).
This model is compatible with the CP2800. These modules clean the helium gas flow using dehydrated charcoal, glass, wool, and felt.

ID C10-028

$ 4,217.00

Pre Order Now

AutoProbe™ 300/400 Keyed Probe Tips (Box of 20)

Custom designed tungsten keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems. Supplied in a 20 pack.

ID PT-0001.13.01

$ 388.00

Pre Order Now

SUMITOMO F-70 COMPRESSOR INLINE FILTER EXTERNAL (59-VFZ0060)

Sumitomo F-70 compressor inline external filter.
Please note: Image shows main unit and not inline external filter.

ID SP-028

$ 2,667.00

Pre Order Now

MercuryIPS 60A superconducting magnet power supply. slave unit (59-CQX0000)

MercuryiPS 60A 10V intelligent superconducting magnet power supply slave unit for the control of cryogenic and magnetic environments.

ID E1-061

$ 8,984.00

In Stock 1

10-Pin Socket, hermatic, female (59-PCS0002)

10-Pin Socket hermatic (female with plastic casing). Fits A1-106. Compatible with A1-106, mates with A1-108

ID A1-107

$ 50.00

In Stock 10

GSR Backscatter Standard Rh/Mn

GSR Backscatter Standard Rh/Mn.

ID 51-1606-017

$ 1,010.00

Pre Order Now

Sensor and Heater Cement - 50g (59-C4-105)

Sensor and Heater Cement (50g) ideally suited to potting temperature sensors and heaters. Can be softened for removal by soaking in warm soapy water.

ID C5-105

$ 37.00

In Stock 2

AutoProbe™ 300/400 Probe Tips for FEI SDB Front Port (Box of 20)

Custom made OmniProbe AutoProbe™ 300 400 Probe Tips for FEI SDB Front Port. In-situ width (Tungsten) needle with stainless steel shank. Supplied in a box of 20.

ID PT-0001.14.01

$ 790.00

Quantity Discounts

Buy 5-9 items ($ 671.50 each)
Buy 10+ items ($ 592.50 each)

In Stock 4

LN2 SENSOR 7.5L 380mm (Light Grey)

LN2 SENSOR 7.5L 380 (Light Grey)

ID 51-1582-025

$ 212.00

Pre Order Now

68ohm heater for Heliox sorb (59-PRZ0017)

68ohm heater for Heliox sorb. The Heliox range of liquid helium cooled,
sorption pumped 3He refrigerators are manufactured by Oxford Instruments.

ID SP-012

$ 69.00

Pre Order Now

27 Pin Fischer Connector SE105A102 (59-EPF5503)

Fischer Connector 27 Pin SE105A102. This connector comes unwired with 27 pin Nbr contacts.

ID SP-026

$ 283.00

Pre Order Now

Single BNC Socket (59-PCZ0007)

Single 50Ω BNC Socket.

ID A1-117

$ 156.00

Pre Order Now

Thermal G Bath Fluid (10 Ltr)

JULABO Thermal G is a bath fluid based on water-glycol and features excellent thermal properties. 30...+80°C Working Temperature. In addition, JULABO Thermal G supplies anti-freeze protection and thus it is most suitable for applications below the freezing point of water.

ID 94-G-WTR-SUN-909

$ 470.82

In Stock 1

General Purpose Transfer Tube TTN2FDH Standard Flexible (59-ADZ1739)

General Purpose Transfer Tube TTN2FDH Standard Flexible Transfer Tube - Constructed of high quality stainless steel tubing that is vacuum insulated.

ID H7-102

$ 2,776.90

$ 3,967.00

In Stock 1

Watlow Heaters 40V, 40W. Dia = 0.125 (59-PFA0021)

Watlow Heaters 40V, 40W. Dia = 1/8", Length = 1.25

ID A6-307

$ 162.00

Pre Order Now

WAFER CLAMP 6 INCH QUARTZ

WAFER CLAMP 6" QUARTZ SERIES ll

ID 94-MD91B25974

$ 2,942.29

In Stock 1

Watlow Heaters 40V, 40W. Dia = 0.250 (59-PFA0009)

Watlow Heaters 40V, 40W. Dia = 0.250, Length = 1.0

ID A6-303

$ 170.00

Pre Order Now

4 Post Omniprobe® Copper Lift-out grids (Box of 100)

Box of 100 Omniprobe^® 4 post copper TEM lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, and have lower profile sides for easier access to outermost posts.

ID GRD-0001.10.01-01

$ 146.00

Quantity Discounts

Buy 5-9 items ($ 124.10 each)
Buy 10+ items ($ 109.50 each)

In Stock 15

CONNECTOR NANO 51 FEMALE (59-DCV0193)

Connector Nano 51 Female with twisted pair loom

ID SP-047

$ 2,153.00

Pre Order Now

MERCURY-CD-L Cryogen level metering card for Mercury instruments (59-PNV00030

Cryogen level metering card for Mercury instruments ITC and IPS units. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-415

$ 1,456.00

$ 2,080.00

In Stock 1

4 Post Omniprobe® Moly Lift-Out Grids (Box of 25)

A box of 25 Omniprobe® 4-post lift-out grids for in-situ lift-out. These grids include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with "V" shaped alignment surfaces. Made from Molybdenum.

ID GRD-0001.06.01

$ 352.00

Quantity Discounts

Buy 5-9 items ($ 299.20 each)
Buy 10+ items ($ 264.00 each)

In Stock 16

It appears that your browser has cookies disabled.

Pneumatics

By Category

Quantity Discounts

Quantity Discounts

Quantity Discounts

SELECT YOUR REGION

MY ACCOUNT