Buy spares and accessories online

A pen providing a sticky membrane, stable up to 120°C, which stops paraffin sections moving, wrinkling or falling off slides. It also flattens the sections, avoiding the need to extend them in hot water prior to application.

ID 51-1625-0750

$ 165.80

Pre Order Now

End Effector Type 3 (Straight)

Straight End Effector for Xtreme Access probe shaft. Copper (Cu)

This item is on pre-order and will take around 1-2 weeks to arrive.

ID 51-1625-0675

$ 951.21

Pre Order Now

Quantifoil 200 Mesh Copper R2/1µm - Circular Holey Carbon Films

Quantifoil 2um dia (1µm) 200 Mesh Copper (Pack of 10)
Circular hole, size 2µm dia, separation 1µm, pitch 3µm

ID 51-1625-0087

$ 134.56

$ 192.23

In Stock 1

MICA DISK, 15MM, V1

High quality V1 muscovite mica disks - pack of 20
15mm diameter, 0.15mm thick

ID 080.172

$ 167.37

Pre Order Now

A/R CALIBRATION GRATING - STEEL PUCK MOUNTED

XYZ Calibration Reference Sample for AFM/SPM

ID 900.237

$ 360.00

Pre Order Now

Probe shaft set screws (Pack of 10)

Probe shaft set screws that come in a pack of 10 and are for use with the Omniprobe Autoprobe™200 and 400 systems.

ID SS-0001.01.00-00

$ 19.00

In Stock 2

5 Thin Film Standards

These standards are supplied as fine powders that are dispersed onto holey-carbon films and are selected from the range of certified natural and synthetic compounds already in use by us to prepare bulk analysis standards.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0662

$ 386.75

Pre Order Now

Double Connector Housing

Double connector housing, including nuts and O rings.

ID A1-103

$ 413.00

$ 590.00

In Stock 1

SEM Metallurgical Mount Sample Holder (1.5 inch Dia)

These holders with pin stub mounts accept standard metallurgical mounts.
(1.5 inch Diameter)

ID 51-1625-0768

$ 100.00

Pre Order Now

Sample Holder Optical (Optistat 10mm clear) SH2+4 (59-DDZ1938)

Sample Holder Optical (Optistat 10mm clear) SH2+4. These sample holders are available for our range of 20 mm sample space liquid helium continuous-flow cryostats, nitrogen and helium bath cryostats.

ID A7-109

$ 1,084.00

Pre Order Now

Platinum/Iridium Aperture (4mm dia x 0.6mm Thick, Hole 5um)

Platinum/Iridium Aperture 4mm dia x 0.6mm Thick Hole 5um. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray

ID 51-1625-0026

$ 525.89

Pre Order Now

Sample Holder Optical (Optistat 12.7mm clear) SH2+2 (59-DDZ1922)

An optical sample holder for use with an Optistat CF/DN cryostat, with two 12.7mm holes and clamps for transmission measurements. Supplied unwired.

ID A7-110

$ 805.00

Pre Order Now

Quartz Slide 25mm x 25mm x 1mm

This range of quartz slides is made from fused quartz Vitreosil 077®. They are particularly useful for applications where high temperature and UV transparency are needed.

ID 51-1625-0293

$ 28.94

In Stock 5

PTFE Tape, 12mm, 12m reel (59-TTZ0007)

Polytetrafluoroethylene (PTFE) Sealing Tape, 12mm (12m reel). For threaded connection on cryogenic tanks.

ID C8-101

$ 11.00

In Stock 2

A/R CALIBRATION GRATING - GLASS SLIDE MOUNTED

XYZ Calibration Reference Sample for AFM/SPM

ID 900.238

$ 360.00

Pre Order Now

Low profile TEM grid holder with 2 sample pucks

Dual TEM low profile grid holder / sample holder for FIB and SEM/FIB systems with stations for 2 TEM lift-out grids and 2 sample mounts. Made from aluminium.

ID TGH-0001.25.00

$ 1,440.00

In Stock 3

Microstat HR2 Top Plate

Microstat HR2 Top Plate With Sapphire 25mm Clear Access (SOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 0.5mm thick Spectrosil B window.

ID A9-936

$ 1,941.00

Pre Order Now

Cryo-gripper

Cryo-gripper for easy retreival of the metal cryo grid boxes.

ID 51-1625-0557

$ 8.04

Pre Order Now

SEM Specimen Stub, 12.5mm dia, carbon

SEM Specimen Stub for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. 12.5mm dia. Carbon

ID 51-1625-0091

$ 9.09

In Stock 6

Platinum Aperture (2mm dia x 0.1mm)

2mm dia, 0.1mm thick. Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.

ID 51-1625-0313

$ 86.60

$ 123.72

In Stock 4

Parallel Bar 400 Mesh TEM Support Grids (Copper)

400 mesh, parallel bar, 3.05mm diameter TEM grids

ID 51-1625-0842

$ 31.24

Pre Order Now

Gold-On-Carbon SEM Resolution Test on Pin Stub

ID 51-1625-0255

$ 111.77

In Stock 9

Sapphire Middle Window

Sapphire Middle Window (CCC and CF/DN old style). Sapphire is an alternative window for visible and near IR applications.

ID A9-213

$ 367.00

Pre Order Now

Standard block set 2 (55 elements)

STANDARDS BLOCK SET 2 - 55 standards covering 56 elements plus Faraday cup.

ID 51-1606-021

$ 5,900.00

In Stock 1

Athene Old 200 Grids Copper 3.05mm (Tube of 100)

Athene TEM support grids - 3.05mm diameter, standard pattern grids - extremely high standard grids which are renowned for their quality.

ID 51-1625-0204

$ 24.27

$ 34.67

In Stock 14

Si3N4 (Si) mass thickness standard

ID 51-1606-064

$ 2,040.00

Pre Order Now

5 Post Omniprobe® Copper Lift-Out Grids (Box of 100)

A box of 100 Omniprobe^® 5 post copper lift-out TEM grids specifically designed for in-situ lift-out. These CU grids include multiple indexed mounting locations, all with vertical bar attachment surfaces. Now with lower profile sides for easier access to outermost posts.

ID GRD-0001.04.02

$ 268.00

Quantity Discounts

Buy 5-9 items ($ 227.80 each)
Buy 10+ items ($ 201.00 each)

In Stock 293

SEM Stub Freeze Dry Holder

A simple holder for five 12.5mm pin type stubs.

ID 51-1625-0466

$ 65.41

Pre Order Now

Thin Foil Aperture (2mm dia, 0.25mm thickness)

Thin film apertures are frequently used in the objective lenses of high resolution and electron beam lithography instruments.

ID 51-1625-0033

$ 111.33

$ 159.04

In Stock 1

AutoProbe™ 250 & 200 Equipped with Short-Cut-Box (Box of 10)

Custom made probe tips for the AutoProbe™ 250 & 200 systems. Compatible with short-cut system. All-tungsten design with a 0.508mm (0.020") shank diameter. The tip radius better than 0.5µm with a taper of 6° taper angle for greater precision.

ID PT-0001.05.01

$ 195.00

Quantity Discounts

Buy 5-9 items ($ 165.75 each)
Buy 10+ items ($ 146.25 each)

In Stock 4

Omniprobe Xtreme Access Short-Cut™ probe tips, 6deg taper angle (10)

A box of Omniprobe Xtreme Access Short-Cut probe tips with a 6 degree taper angle. Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service.

ID PT-0001.06.01

$ 190.00

Pre Order Now

Sample Holder Optical CF/DN SH2 (59-DDZ0011)

Sample Holder Optical CF/DN SH2 with 12.5mm hole and clamp for transmission measurements.

ID A7-108

$ 420.00

Pre Order Now

Micrometer Standards – PS1 with Graticules Certificate

These calibrated standards provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

This item is on pre-order and will take around 1-2 weeks to arrive.

ID 51-1625-0673

$ 798.20

Pre Order Now

Triple Slot TEM Support Grids (Tube of 100)

This triple slot TEM support grid provides increased support by way of two strengthening bars enabling thinner support films to be used.

ID 51-1625-0801

$ 51.21

Pre Order Now

Sample Pin Stubs (10 Pack)

Pre-tilt single sample holder 21mm. EBSD sample stub XL20

ID 51-1120-465

$ 56.00

In Stock 5

FIB 3 Post Copper Lift-Out Grids (Box of 100)

Box of 100 3 post copper Lift-out TEM grids for FIB applications.

ID 51-1625-0492

$ 106.07

Pre Order Now

Semclip 25mm Specimen Pin Mount (3 Clips)

25mm diameter SEMClip mounts, available with 1, 2 or 3 clips.

ID 51-1625-0775

$ 82.32

Pre Order Now

Silver Coated Square Coverslips

We offer a variety of economically priced silver coated substrates. All coatings are deposited under vacuum using electron beam evaporation. These high quality substrates are coated with 500 Å (50 nm) of silver, with a thin titanium adhesion layer (2-7 nm) between the glass and silver coating. This adhesion layer can also be replaced with chromium upon request.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0622

$ 95.82

Pre Order Now

Parallel Bar 50 Mesh TEM Support Grids (Nickel)

50 mesh, parallel bar, 3.05mm diameter TEM grids. Also available in Copper

ID 51-1625-0836

$ 37.24

Pre Order Now

Standard Carbon Adhesive Tabs, 32 mm Dia.

Standard Carbon Conductive Adhesive Tabs are formed by two sides of thick conductive adhesive (45µm on each side) with the center conductive core film (35µm). With the total thickness of 125µm, these tabs will offer reasonably firm, smooth surfaces for a variety SEM applications, including gunshot residue analysis. Tabs are protected by white liners, which do not have to be removed when samples are ready to be mounted.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0589

$ 29.68

Pre Order Now

Omniprobe® Lift Out Grid Storage Box

Omniprobe® Storage box that stores 100 FIB lift out grids or can also store standard 3mm TEM grids flat. Comes complete with base, lid and clips. Overall size is 55 x 51 x 10.7mm (2.16" x 2" x 0.42")

ID GSB-0001.01.01-01

$ 41.00

In Stock 2

3 Post Omniprobe® Copper Grids, side access (Box of 100)

Omniprobe^® 3 post copper lift-out TEM grids, 35 micron thick with 1 edge lower for easy access. These grids are similar to GRD-0001.08.01 with one lower side. They come packaged in glass vials.

ID GRD-0001.07.01

$ 146.00

Quantity Discounts

Buy 5-9 items ($ 124.10 each)
Buy 10+ items ($ 109.50 each)

In Stock 52

Aluminized Mylar Tape, 55m reel (59-TTZ0003)

Ultra-thin, transparent, self adhesive Aluminized Mylar 25mm Tape (55m reel).

ID C8-102

$ 111.00

In Stock 14

Tabbed TEM Support Grids 200 Mesh

Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 200 mesh. Copper, Nickel or Gold.

ID 51-1625-0831

$ 35.68

Pre Order Now

Platinum Aperture (1.85mm dia x 0.1mm Hole 150um)

1.85mm dia, 0.1mm thick. Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.

ID 51-1625-0319

$ 155.38

$ 221.97

In Stock 5

Sample Holder Plain Flat SH1 (59-DDZ0010)

Sample Holder Plain Flat SH1 for susceptibility, Hall effect, resistivity measurements, etc.

ID A7-105

$ 420.00

Pre Order Now

Evaporated Aluminium Film 3mm

ID 51-1625-0183

$ 20.93

$ 29.90

In Stock 14

AR-PPLN TEST SAMPLE - MOUNTED ON 15MM SAMPLE PUCK

Periodically Poled Lithium Niobate (LiNbO3) PFM Test Sample

ID 900.241

$ 405.00

Pre Order Now

Microstat He Reflection Mounting Plate (59-DVO0092)

Microstat He Reflection Mounting Plate

ID A9-902

$ 493.00

Pre Order Now

Platinum Round Coverglasses (25mm, #1)

Made of a water-white colorless borosilicate glass, with an optimum hydrolytic resistance. Ultra-thin. Performs exceptionally well on all automated glass coverslippers. Available in multiple dimensions.

This item is on pre-order and will take between 1-2 weeks to arrive.

ID 51-1625-0668

$ 499.20

Pre Order Now

Platinum/Iridium Aperture (4mm dia x 0.6mm Thick, Hole 200um)

Platinum/Iridium Aperture 4mm dia x 0.6mm, Thick Hole 5um
High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray

ID 51-1625-0064

$ 112.16

$ 160.23

In Stock 3

It appears that your browser has cookies disabled.

Windows

Imaging Modes

By Imaging Mode

Manufacturer

By Category

Quantity Discounts

Quantity Discounts

Quantity Discounts

SELECT YOUR REGION

MY ACCOUNT