Buy spares and accessories online

Pre-tilt single sample holder for Hitachi SEM

Multi Sample holder for Hitachi microscopes pretilted.

ID 51-1120-035

$ 614.00

In Stock 3

ILM He PROBE LEAD - 10 PIN SEAL (59-CZZ0702)

ILM He probe lead(10 pin seal)

ID SP-099

$ 278.00

Pre Order Now

Cryomech Stainless Steel flexiline with Aeroquip 1/2 & 3/4 connectors 10m (59-VPZ0598)

Aeroquip 1/2-3/4 3/4 ID 10 meters

ID SP-071

$ 6,173.00

Pre Order Now

AutoProbe™ 300/400 Keyed Probe Tips for FEI Helios Front Port (Box of 20)

Custom keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a flat on the reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems.

ID PT-0001.15.01

$ 405.00

Pre Order Now

Fischer 27 pin DBEE105A Receptacle 27 way socket (59-EPF5502)

Fischer 27 Pin DBEE105A Receptacle 27 way socket

ID SP-025

$ 393.00

Pre Order Now

Polythene Olives 15.9mm ID (59-H1-403)

Polythene Olives for sealing tubes in compression fittings 15.9mm diameter
(Sold in a pack of 10)

ID H1-403

$ 34.30

$ 49.00

In Stock 2

Helium Cold Trap 1.1m (59-A240209_5)

Helium cold Trap 1.1mtr 3/8 diameter - absorbs gases and impurities that can not be absorbed by a nitrogen cold trap.

ID H6-111

$ 2,514.40

$ 3,592.00

In Stock 1

Film Heater 25W. 25 ohm (59-PFZ0004)

Flexible Film Heater 25W, 25 ohm. An economical film heater with working temperatures up to 200ºC.

ID A6-203

$ 124.60

$ 178.00

In Stock 1

KNF pump bypass manifold (59-A291864)

KNF pump bypass manifold which permits the KNF pumped to be switched off whilst the system is in a stable state.

ID SP-109

$ 4,327.00

Pre Order Now

FILTER UV/RF

Filter for chamber viewpoints

ID 94-MD81D14211

$ 107.34

In Stock 1

Pressure Transducer LEAD 10m (59-CWA0809_10)

Pressure transducer Lead 10M

ID SP-041

$ 237.00

Pre Order Now

PSU 24V/+15V/-15V

LAMBDA POWER SUPPLY UNIT - 24V/+15V/-15V

ID 94-EXP1524

$ 783.60

In Stock 1

Blanking Plate for BNC Socket (59-P270608)

Blanking Plate for BNC Socket to ensure protection from dust and moisture.

ID A1-119

$ 152.00

Pre Order Now

SM4000 Needle valve heater and sensor assembly (59-A6-206)

Needle valve heater and sensor assembly for the Spectromag SM4000 superconducting magnet.

ID A6-206

$ 609.00

Pre Order Now

FORE PUMP SENSOR CABLE - 15m (59-CWA9206)

Fore pump sensor cable - 15m

ID SP-053

$ 199.00

Pre Order Now

CONNECTOR SMP-SMP ADAPTOR (59-PCP02350

Connector: SMP-SMP adaptor

ID SP-088

$ 258.00

Pre Order Now

VCR 1/4 Filter Gasket 0.5M (59-VZU0065)

VCR Triton precool circuit filter -1/4

ID SP-034

$ 47.00

In Stock 5

Pivoting grid holder -10+10° Stub

ID 51-1151-005

$ 4,675.00

Pre Order Now

Watlow Heaters 40V. 40W. Dia = 0.125" (59-PFA0006)

Watlow Heaters 40V. 40W. Dia = 0.125". Length = 1.0

ID A6-308

$ 116.00

Pre Order Now

Transfer Tube Extension for TTN Series - 500mm (57-DDN0737)

Transfer Tube Extension for TTN Series - 500mm but can be shortened if neccessary.

ID H7-150

$ 544.00

In Stock 1

LCC 20 Horizontal Sample holder Assembly (59-A242593)

LCC 20 horizontal Sample holder Assembly for use in a cryostat.

ID SP-126

$ 580.30

$ 829.00

In Stock 2

Transfer tube entry adaptor (59-DCZ0058)

Transfer tube entry coupling for connecting a transfer tube to a continuous flow cryostat.

ID H8-311

$ 752.00

Pre Order Now

LLT650/10 - Automated Transfer Tube: 1.0m Dewar Leg, 1.2m Flexible Section (59-ZDZ2592)

LLT650/10 - An Automated Low Loss Transfer Tube with automatic needle valve control option: 1.0m Dewar Leg, 1.2m Flexible Section

ID H7-305

$ 7,086.00

Pre Order Now

Cryogenic Ribbon Cable Loom 8. NbTi (59-PAZ0039)

Cryogenic Ribbon Cable Loom 8, NbTi

Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.

ID A8-313

$ 214.00

In Stock 5

LLT650/13 - Automated Transfer Tube: 1.3m Dewar Leg, 1.2m Flexible Section (59-ZDZ2593)

LLT650/13 - An Automated Low Loss Transfer Tube with automatic needle valve control option:: 1.3m Dewar Leg, 1.2m Flexible Section

ID H7-306

$ 8,507.00

Pre Order Now

4 Post Omniprobe® Copper Lift-out Grids (Box of 100)

A box of 100 Omniprobe^® 4 post copper TEM lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, two with vertical bar attachment surfaces and two with "V" shaped alighment surfaces.

ID GRD-0001.05.01-01

$ 244.00

Quantity Discounts

Buy 5-9 items ($ 207.40 each)
Buy 10+ items ($ 183.00 each)

In Stock 75

ILM Probe 10m Nitrogen Lead with Fischer Connector (59-CNC6610)

Nitrogen level probe lead for connecting nitrogen level probes to ILM or Mercury. This lead provides connection between the ILM series level meter and the probe. Supplied with a Fischer connector.

ID E2-824

$ 399.70

$ 571.00

In Stock 1

ITC Series Input Lead 6m - 10 pin Seal Connectors (59-CQB0092)

ITC Series Input Lead 6m - 10 pin Seal Connector to the Mercury or ITC series temperature controller from a cryostat.

ID E5-802

$ 188.00

In Stock 1

24-Pin Fischer Plug, male (59-EPF5493) - Compatible with A1-204

24-Pin Fischer Plug - Male which is compatible with A1-204. 24 Pin Nbr contacts diameter 0.7mm, Rated voltage r.m.s. (V) ≤250, Current (A): 3.5

ID A1-203

$ 302.00

In Stock 3

PTFE Sealing Olives for use with LLT and TTL Transfer Tubes (59-DDZ0176)

PTFE Sealing Olives for use with LLT and TTL Transfer Tubes - to be fitted to the cryostat end of a LLT continuous flow transfer tube.

ID H7-350

$ 46.00

In Stock 5

H5 Thermal (10L) Fluid

Thermal bath fluids have been carefully selected and proven in long-term service. They are suited for use with heated and refrigerated circulators.

ID 94-G-WTR-SUN-903

$ 1,823.72

In Stock 1

POWER LEAD PSU COMPRESOR 15m (59-Z270830S)

Power lead psu compressor 15m

ID SP-052

$ 488.00

Pre Order Now

ITC Series Auto Needle Valve Cable (59-CWA0112)

ITC Series Auto Needle Valve Cable

ID E5-805

$ 221.20

$ 316.00

In Stock 2

Cryogenic Ribbon Cable Loom 3. NbTi (59-PAZ0033)

Cryogenic Ribbon Cable Loom 3, NbTi with Male and female 25 way MDM connectors

ID A8-303

$ 1,910.00

In Stock 3

BEARING GUIDE RND SHAFT

ION BEAM PLATEN CLAMP BEARINGS

ID 94-MA31C25229

$ 1,952.46

In Stock 2

Connector Housing for 10-Pin Fischer connectors (59-DFC0423)

Connector Housing (for 10-Pin Fischer connectors). A Fischer Connector housing provide mechanical support for the contact members

ID A1-213

$ 246.00

Pre Order Now

FILAMENT HPN

ION SOURCE FILAMENT

ID 94-MA00D27078

$ 63.42

In Stock 1

LCC 44 HORIZONTAL Sample holder Assembly (59-A242594)

LCC 44 HORIZONTAL Sample holder Assembly

ID SP-128

$ 667.10

$ 953.00

In Stock 2

CP289C PACKAGE 380/420 50Hz (59-Z270763)

Cryomech CP289C Compressor package 380/420 50hz.
Water cooled Cryomech CP289C compressor package for SP-091 PT410 cold head.

ID SP-092

For availability and prices please request a quote.

Pre Order Now

SHOWERHEAD RIE STD

STANDARD RIE SHOWERHEAD

ID 94-MD84A16659

$ 2,428.57

In Stock 1

7-Pin Fischer Plug, female (59-EPF4054) - compatible with A1-210

7-Pin Fischer Plug - Female, which is compatible with A1-210. 4 Pin contacts diameter 0.9mm, Rated voltage r.m.s. (V) ≤250, Current (A)

ID A1-209

$ 196.00

Pre Order Now

10-Pin Fischer Socket, male (59-EPF3110) - Compatible with A1-205

10-Pin Fischer socket - Male which is compatible with A1-205. This socket has 10 Pin contacts with a diameter of 0.7mm.

ID A1-206

$ 203.00

Pre Order Now

MERCURY-CD-H Additional 80W heater card for Mercury instruments (59-PNV0002)

Additional 80W heater card for Mercury instruments for Mercury ITC only. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-412

$ 705.00

In Stock 2

Standard Nitrogen Probe with Fischer 3 pin connector (59-KRA0282)

Standard Nitrogen Probe with Fischer 3-pin connector - The stainless steel probe tube is a coaxial capacitive sensor.

ID H2-201

$ 2,150.00

Pre Order Now

ITC Series Dual Input Lead 6m with Fischer Connector

ITC Series Dual Input Lead 6m with Fischer Connector, with a cable terminating in two ITC input connectors on one end and a Fischer Connector on the other.

ID E5-809

$ 503.00

Pre Order Now

AutoProbe™ 200/100.7 Nickel Shank Tungsten Tip (Box of 10)

Box of 10 custom made Omniprobe AutoProbe™ probe tips designed with a nickel tube shank and tungsten tip. Tip radius is 0.5µm with 13° taper angle for maximum lifetime service.

ID PT-0001.01.01-01

$ 289.00

Quantity Discounts

Buy 5-9 items ($ 245.65 each)
Buy 10+ items ($ 216.75 each)

In Stock 8

AutoProbe™ 200/100.7 Narrow width Probe Tip (Box of 10)

Box of 10 custom dual taper narrow width sharp tip made from tungsten. The tip radius is 0.5 µm with 8 to 10° taper angle for maximum lifetime service. For use with Omniprobe AutoProbe™ 200 and 100 systems.

ID PT-0001.09.01-01

$ 241.00

Quantity Discounts

Buy 5-9 items ($ 204.85 each)
Buy 10+ items ($ 180.75 each)

In Stock 30

GGE ACT INVERT MAG AIM-S-NW25

PENNING GAUGE

ID 94-G-VAC-GGE-004

$ 1,129.00

In Stock 1

Nitrogen Vent Pressure Relief Valve - 16mm I/D ; 67mm tall (59-DCV0175)

Nitrogen Vent Pressure Relief Valve (16mm I/D ; 67mm tall) A pressure relief valve to fit nitrogen vent ports on a standard range of Oxford Instruments cryostats.

ID A3-205

$ 297.00

Pre Order Now

Omniprobe® OP400L Low-Magnetic Low Profile Tip

OmniProbe® 400L Low-Magnetic Low profile BX20 probe tips for in situ.
Low profile dual taper design includes these features: 6° taper angle with a tip .

ID 51-1143-032

$ 843.00

Pre Order Now

51-51 Nano SKT Cable with Shield (59-PCS0251)

51 - 51 contact Nano Socket cable with shield (female to female)

ID SP-013

$ 3,884.00

Pre Order Now

It appears that your browser has cookies disabled.

PC Component

By Category

Quantity Discounts

Quantity Discounts

Quantity Discounts

SELECT YOUR REGION

MY ACCOUNT