MICROSCOPY SUPPLIES

    • Products(1,038)
    • NEW(258)
    • NEW PRODUCTS(258)
    • AFM PROBES (2)
    • LAB SUPPLIES(65)
    • MICROSCOPY SUPPLIES(126)
    • STORAGE(38)
    • TWEEZERS / TOOLS(63)
    • Software(2)
    • Support(5)
    • Training(18)
    Very High Resolution Calibration Reference and Traceable Standard for AFM, SEM, Auger, and FIB product photo
    Very High Resolution Calibration Reference and Traceable Standard for AFM, SEM, Auger, and FIB

     Model 70-1D with Cert Unmounted

    For General Purpose and Metrology Microscopes: A precision pattern providing accurate calibration in the horizontal plane for very high resolution, nanometer-scale measurements.

    Period: 70 nm pitch, one-dimensional array. Accurate to +/- 0.25 nm.  Refer to calibration certificate for actual pitch.

    Surface: Silicon Oxide ridges on Silicon, 4 x 3 mm die.  Ridge height (about 35 nm) and width (about 35 nm) are not calibrated.

    This item is on pre-order and will take around 1-2 weeks to arrive.

    ID 51-1625-0689
    £ 4,461.02
    Pre Order Now
    Cryo-Laminate™ Tape product photo
    Cryo-Laminate™ Tape
    This Cryo-Laminate tape protects against extreme cryogenic conditions including liquid and vapor phase liquid nitrogen as well as other chemicals. This ultra-thin cryo laminating tape provides excellent protection against most chemicals and reagents.

    This item is on pre-order and will take between 1 - 2 weeks to arrive.

    ID 51-1625-0604
    £ 31.49
    In Stock 2
    Multi Element Block of 15 Standards Auger MAC product photo
    Multi Element Block of 15 Standards Auger MAC
    MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

    This item is on pre-order and will take around 1-2 weeks to arrive.
    ID 51-1625-0687
    £ 2,304.02
    Pre Order Now
    SEM Metallurgical Mount Sample Holder (1.25 inch Dia) product photo
    SEM Metallurgical Mount Sample Holder (1.25 inch Dia)
    These holders with pin stub mounts accept standard metallurgical mounts.
    (1.25 inch diameter)
    ID 51-1625-0763
    £ 92.96
    Pre Order Now
    Cavity Slide - Single Depression product photo
    Cavity Slide - Single Depression
    These slides are useful in Light Microscopy applications and work as moist chambers for observing hanging drops.
    ID 51-1625-0755
    £ 224.98
    Pre Order Now
    Alpha/Numeric Index Grids product photo
    Alpha/Numeric Index Grids
    By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/") and (300 Lines/"/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels.

    This item is on pre-order and will take between 1-2 weeks to arrive.

    ID 51-1625-0620
    £ 69.21
    Pre Order Now
    Graphene-Enhanced Lacey Carbon TEM Grid 200 (copper) product photo
    Graphene-Enhanced Lacey Carbon TEM Grid 200 (copper)

    Graphene is a single atomic layer of carbon atoms tightly packed in a two-dimensional honeycomb lattice. This novel material is atomically thin, chemically inert, consists of light atoms, and possesses a highly ordered structure. Graphene is electrically and thermally conductive, and is the strongest material ever measured. These remarkable properties make graphene the ideal support film for electron microscopy.

    This item is on pre-order and will take between 1-2 weeks to arrive.

    ID 51-1625-0581
    £ 12.77
    Pre Order Now
    TEM Support Grids 400 Mesh, 3.05mm (Tube of 100) product photo
    TEM Support Grids 400 Mesh, 3.05mm (Tube of 100)
    3.05mm diameter, square mesh copper TEM grids. All grids are available in 3.05mm diameter and some in 2.3mm diameter.
    ID 51-1625-0096
    £ 24.30
    Pre Order Now
    Biopunch ID 4.0mm OD 4.41mm (5 Pack) product photo
    Biopunch ID 4.0mm OD 4.41mm (5 Pack)
    The Biopunch is a coring tool designed to core, punch and retrieve samples from thin or soft substrate source materials such as tissue, gels, paper, cloth, leaves, paint chips and films. Each punch consists of a sure grip hollow plastic embossed handle with a razor sharp seamless stainless steel cutting tip protected by a clear removable cap,  individually packaged sterile with lot number and expiration date clearly imprinted on the package.
    ID 51-1625-0851
    £ 23.37
    Pre Order Now
    Micrometer Standards 0.1" in 0.001" divisions for reflected light product photo
    Micrometer Standards 0.1" in 0.001" divisions for reflected light
    These Micrometer Scale standards 0.1"; in 0.001" divisions for reflected light. They provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

    This item is on pre-order and will take around 1-2 weeks to arrive.

    ID 51-1625-0664
    £ 295.61
    Pre Order Now
    Serialised SEM Specimen Stubs (50 Pack) product photo
    Serialised SEM Specimen Stubs (50 Pack)
    Laser etched serialised standard 12.5mm dia aluminium pin stubs with pre-mounted carbon tabs, suitable for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments.
    ID 51-1625-0811
    £ 89.69
    In Stock 2
    Semclip 25mm Pin Mount Double (90 Degrees, 2 Clips) product photo
    Semclip 25mm Pin Mount Double (90 Degrees, 2 Clips)
    Pin stub versions of SEMClip mounts are available in 12.5mm and 25mm diameters.
    ID 51-1625-0813
    £ 62.24
    In Stock 2
    Core Sampling Tool product photo
    Core Sampling Tool
    This all new revolutionary multi-purpose sampling tool, has been designed with retractable cutting cannula for easy operation.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0576
    £ 7.78
    Pre Order Now
    Standard Reticles - Single Dashed Cross Lines product photo
    Standard Reticles - Single Dashed Cross Lines
    These standard reticles are manufactured to use with microscope eyepieces. High quality, precision made with different designs and styles that help you do your work.
    RET 50, 13 µm Wide, 21 mm Diameter.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0649
    £ 139.11
    Pre Order Now
    Hybrid cryo-EM sample storage box product photo
    Hybrid cryo-EM sample storage box
    Pastel coloured very robust Hybrid cryo-EM sample storage boxes that come with unique serial numbers and dedicated wells for unclipped grids and also autogrids. Available with pin lid or without pin lid. 
    ID 51-1625-0865
    £ 17.22
    Pre Order Now
    Dissecting Kit in Canvas Holdall product photo
    Dissecting Kit in Canvas Holdall
    Dissection kits in a canvas holdall roll. Available with either reusable scalpels or disposable blade scalpels.
    ID 51-1625-0765
    £ 88.28
    Pre Order Now
    TEM Support Grids 300 Mesh, 3.05mm (Tube of 100) product photo
    TEM Support Grids 300 Mesh, 3.05mm (Tube of 100)

    300 mesh, square pattern, 3.05mm diameter TEM grids.

     

    ID 51-1625-0406
    £ 29.16
    In Stock 8
    Highly Ordered Pyrolytic Graphite (HOPG) product photo
    Highly Ordered Pyrolytic Graphite (HOPG)
    HOPG is widely used as a substrate for specimens to be examined in scanning probe microscopy. It is also used as a calibration specimen and cleaves almost like mica because of its layered structure. (HOPG 3.5 ± 1.5 Mosaic Spread)
    ID 51-1625-0744
    £ 142.01
    Pre Order Now
    Polystyrene Latex Particles product photo
    Polystyrene Latex Particles
    This range of polystyrene particles is excellent for SEM calibration purposes. It is possible to derive an internal standard of size by mixing a suitable concentration of these particles with the particles of unknown size being studied.
    ID 51-1625-0847
    £ 24.27
    Pre Order Now
    Tabbed TEM Support Grids 400 Mesh product photo
    Tabbed TEM Support Grids 400 Mesh
    Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 400 mesh. Copper, Nickel or Gold.
    ID 51-1625-0837
    £ 29.46
    Pre Order Now
    Rotary Grid Storage Box for 25 grids product photo
    Rotary Grid Storage Box for 25 grids
    Rotary Grid Storage box that has been designed with the microscopist in mind that stores 25 TEM Grids. They are ideal for both working labs and for longer-term storage.
    ID 51-1625-0882
    £ 5.06
    Pre Order Now
    Tabbed TEM Support Grids 50 Mesh product photo
    Tabbed TEM Support Grids 50 Mesh
    Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 50 mesh. Copper, Nickel or Gold.
    ID 51-1625-0830
    £ 28.55
    Pre Order Now
    Cryo Ultramicrotome Specimen Pins: Slotted Screw (50 Pack) product photo
    Cryo Ultramicrotome Specimen Pins: Slotted Screw (50 Pack)
    Aluminum specimen mount pin for mounting samples for ultramicrotomy. Available in two types: Slotted Screw and Bullseye.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0633
    £ 102.75
    Pre Order Now
    Serialised SEM Specimen Stub with Al core Carbon Tab & Tube (10 Pack) product photo
    Serialised SEM Specimen Stub with Al core Carbon Tab & Tube (10 Pack)
    Serialised standard 12.5mm dia Laser etched aluminium pin stubs with pre-mounted high conductivity aluminium cored carbon tabs in a Pack of 10.
    ID 51-1625-0802
    £ 40.68
    Pre Order Now
    Fuchs Resenthal Counting Chamber product photo
    Fuchs Resenthal Counting Chamber
    Designed for counting leukocytes, eosinophils and cells in cerebrospinal fluid. Grid pattern is etched directly onto the glass surface. The chamber is 0.2 mm, deep.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0671
    £ 439.46
    Pre Order Now
    Micro Pipettes, intraMARK (Pk 250) product photo
    Micro Pipettes, intraMARK (Pk 250)
    Glass micropipettes, that come with a with ring mark for volumetric measurements. They contain the stated volume when filled from one end to the ring mark for volumetric precise measurements.
    ID 51-1625-0477
    £ 88.75
    Pre Order Now
    Semclip 18mm Pin Mount with 1 Clip product photo
    Semclip 18mm Pin Mount with 1 Clip
    Pin stub versions of SEMClip mounts are available in 18 to 50mm diameters, and can be used with all SEMs using pin stubs.
    ID 51-1625-0812
    £ 35.28
    Pre Order Now
    Multi Element Block of 5 Standards Auger MAC product photo
    Multi Element Block of 5 Standards Auger MAC
    MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0680
    £ 1,130.27
    Pre Order Now
    Polypropylene Beaker product photo
    Polypropylene Beaker
    Plastic Beaker for general laboratory use. This Polypropylene Beaker will withstand temperatures up to 135°C. (500ml size)

    This item is on pre-order and will take between 1 - 2 weeks to arrive.
    ID 51-1625-0603
    £ 30.64
    Pre Order Now
    Micrometer Standards – PS4 with NPL certificate product photo
    Micrometer Standards – PS4 with NPL certificate
    These calibrated standards provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

    This item is on pre-order and will take around 1-2 weeks to arrive.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0681
    £ 1,295.47
    Pre Order Now
    Tabbed TEM Support Slot Grids, 2mm x 1mm product photo
    Tabbed TEM Support Slot Grids, 2mm x 1mm
    Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 200 mesh. Copper, Nickel or Gold.
    ID 51-1625-0832
    £ 28.55
    Pre Order Now
    Graphene on Silicon Nitride TEM Grids (2.5 µm holes) product photo
    Graphene on Silicon Nitride TEM Grids (2.5 µm holes)
    200 µm thick 3.0 mm hexagonal silicon substrate with a 0.5 x 0.5 mm aperture and 200 nm thick silicon nitride membrane with approximately 6,400 2.5 µm holes.

     This item is on pre-order and will take around 1-2 weeks to arrive.

    ID 51-1625-0661
    £ 201.16
    Pre Order Now
    Bright Line Counting Chamber product photo
    Bright Line Counting Chamber

    Designed by Leica for accurate counting of blood cells platelets, dust/yeast cluster and specimen samples. Sharp contrast from rhodium plated on "V-Load". Triple dividing lines clearly delineate counting area for accurate and precise results.

    This item is on pre-order and will take between 1-2 weeks to arrive.

    ID 51-1625-0670
    £ 380.97
    Pre Order Now
    15mm Gold Coated Specimen Discs for AFM (5 pack) product photo
    15mm Gold Coated Specimen Discs for AFM (5 pack)
    These metal 15mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0617
    £ 50.07
    Pre Order Now
    Standard Reticles -  Single Solid Cross Lines product photo
    Standard Reticles - Single Solid Cross Lines
    These standard reticles are manufactured to use with microscope eyepieces. High quality, precision made with different designs and styles that help you do your work:

    RET 51, 63 µm Wide, 19 mm Diameter

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0650
    £ 139.11
    Pre Order Now
    Hexagonal Pattern Mesh TEM Support Grids product photo
    Hexagonal Pattern Mesh TEM Support Grids
    Hexagonal pattern, 100 mesh grids offer an alternative to the standard square mesh pattern, providing maximum support for any given mesh repeat distance.
    ID 51-1625-0410
    £ 21.12
    Pre Order Now
    Micrometer Standards –  PS1 with UKAS Certificate product photo
    Micrometer Standards – PS1 with UKAS Certificate
    These calibrated standards provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

    This item is on pre-order and will take around 1-2 weeks to arrive.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0676
    £ 643.39
    Pre Order Now
    10mm Gold Coated Specimen Discs for AFM (5 pack) product photo
    10mm Gold Coated Specimen Discs for AFM (5 pack)
    These metal 10mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0612
    £ 45.14
    Pre Order Now
    Silicon Nitride Lift-Out TEM Windows product photo
    Silicon Nitride Lift-Out TEM Windows

    Low-stress silicon nitride for lift-out applications. Available with or without gold contacts.

    This item is on pre-order and will take between 1-2 weeks to arrive.



    ID 51-1625-0614
    £ 45.96
    Pre Order Now
    Silver Coated Microscope Slide product photo
    Silver Coated Microscope Slide
    We now offer a variety of economically priced silver coated substrates. All coatings are deposited under vacuum using electron beam evaporation. These high quality substrates are coated with 500 Å (50 nm) of silver, with a thin titanium adhesion layer (2-7 nm) between the glass and silver coating. This adhesion layer can also be replaced with chromium upon request.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0618
    £ 55.81
    In Stock 2
    Bright Line Chamber Only product photo
    Bright Line Chamber Only

    Designed by Leica for accurate counting of blood cells platelets, dust/yeast cluster and specimen samples. Sharp contrast from rhodium plated on "V-Load". Triple dividing lines clearly delineate counting area for accurate and precise results. Molded from a single piece of thermal and shock resistant glass with a polished chamber and cover glass assuring precise capillary loading and even cell distribution. Fluid volume is 0.1 mm3/mm2 and 0.00025 mm2 per each square.

    This item is on pre-order and will take between 1-2 weeks to arrive.

    ID 51-1625-0663
    £ 266.36
    Pre Order Now
    Silicon nitride membranes - 100nm Si Nitride 0.5mm x 0.5mm EA (7x7 array) product photo
    Silicon nitride membranes - 100nm Si Nitride 0.5mm x 0.5mm EA (7x7 array)
    200µm substrate thickness, multi-frame array (7 x 7 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes.
    ID 51-1625-0713
    £ 410.94
    Pre Order Now
    Multi Element Block of 10 Standards Auger MAC product photo
    Multi Element Block of 10 Standards Auger MAC
    MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0685
    £ 1,651.94
    Pre Order Now
    Swiss Line Wafer Handling Tweezer (Style 41LB8) product photo
    Swiss Line Wafer Handling Tweezer (Style 41LB8)
    Swiss line wafer handling tweezers are suitable to delicate applications which require holding a wafer.

    This item is on pre-order and will take between 1 - 2 weeks to arrive.

    ID 51-1625-0607
    £ 34.47
    Pre Order Now
    Conical Tubes, Individually Wrapped & Sterile product photo
    Conical Tubes, Individually Wrapped & Sterile
    The same screw-cap conical tubes that you know and trust, repackaged into individual packets. Individual tubes are sterile, DNase, RNase, and pyrogen free, and include high contrast graduations, a white "frosted" marking area, and caps with a flat top surface for easy marking and labeling.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0629
    £ 91.11
    Pre Order Now
    Clipping Tools and Rack product photo
    Clipping Tools and Rack
    Compact-design clipping tool from NanoSoft. Compatible with the NanoSoft clipping station and the Thermo Fisher clipping station. Choose the item you require from the drop down menu.
    ID 51-1625-0725
    £ 266.50
    Pre Order Now
    Perfect Loop for Light Microscopy (Loop and Handle Set) product photo
    Perfect Loop for Light Microscopy (Loop and Handle Set)
    Very lightweight stainless steel loop for manoeuvring freshly cut, thick sections onto grids without creasing. For use in Light Microscopy applications. Perfect Loop, LM, Loop and Handle Set.
    ID 51-1625-0729
    £ 223.68
    Pre Order Now
    Polypropylene Containers (100 Pack) product photo
    Polypropylene Containers (100 Pack)
    A pack of 100 Autoclavable wide neck polypropylene containers offering excellent chemical resistance, and supplied with unlined screw caps. (60ml size)
    ID 51-1625-0880
    £ 78.48
    In Stock 2
    TEM Support Grids 200 Mesh, 3.05mm (Tube of 100) product photo
    TEM Support Grids 200 Mesh, 3.05mm (Tube of 100)
    200 mesh TEM support grids with a 3.05mm diameter - square mesh copper TEM grids
    ID 51-1625-0099
    £ 21.17
    Pre Order Now
    Diamond Grip product photo
    Diamond Grip
    Three or four pong spring-loaded grips are useful for lifting small objects from awkward positions when inspecting them in the microscope.
    ID 51-1625-0853
    £ 23.07
    Pre Order Now
    Hexid Heat Transfer Fluids (5 Litres) product photo
    Hexid Heat Transfer Fluids (5 Litres)
    Hexid heat transfer fluids enhance the performance of your demanding chiller applications. A range of carefully formulated products optimised for temperatures from -45°C to 90°C, will help you get the most from your process. (A6 Version)
    ID 51-1625-0720
    £ 307.13
    Pre Order Now

    Recently Viewed