Oxford Instruments eStore - Consumables, Accessories, Spares, Software and Training for a range of Applications

Acoustic Enclosure Insolator Pad (Pair for One Leg)

Vibration isolation pad for AFM acoustic enclosure leg. Sold in units of pairs for use with one leg.

ID 270.013

£ 39.00

Main power and communication cable for AFM controller to AFM systems. Compatible with all Blackbox, ARC2, ARC2H, and ARC3 controllers.

ID 448.203.1

£ 3,875.00

Jupiter - Air Probe Holder

Standard air probe holder for Jupiter AFM. This cantilever holder enables conductive AFM imaging and I-V measurement capabilities. The standard module is capable of measuring currents ranging from ~1 pA to 20 nA. The dual gain version expands the current measurement range to 10 µA.

ID 902.613

£ 5,850.00

Jupiter - Air Probe Holder Clip

This is the standard probe clip for mounting AFM probes in the holder.

ID 116.876

£ 388.00

Jupiter - Air Tubing (¼" OD x .166 ID)

Blue polyurethane tubing for Jupiter air lines. Sold in 240 in (609 cm) lengths.

ID 231.063

£ 12.00

Jupiter - ORCA Test Resistor (Standard Dual Gain 1uA/V 1G)

Wire assembly provides 1 GOhm of resistance

It can also be used to test the 1nA/V sensitivty of standard dual gain ORCA holder.

Designed for Jupiter AFM.

ID 448.222

£ 23.00

Jupiter - ORCA Test Resistor (Standard Dual Gain 1uA/V 1M)

Wire assembly provides 1 MOhm of resistance

It can also be used to test the 1uA/V sensitivty of standard dual gain ORCA holder.

Designed for Jupiter AFM.

ID 448.221

£ 23.00

Jupiter - ORCA Test Resistor (Standard Single Gain 2nA/V 500M)

Standard Single Gain - 2nA/V (500M) wire assembly provides 500 Mohm of resistance.

It can also be used to test the 2nA/V sensitivty of standard single gain ORCA holder.

Designed for Jupiter AFM.

ID 448.167

£ 23.00

Jupiter - Probe Holder, Clip Screw (Main) NEW MODEL

Screw used to tighten/loosen the probe clip for mounting AFM probes in the holder (2024+)

ID 001.FHCSP.SST

£ 4.00

Jupiter - Probe Holder, Clip Screw (Main) PREVIOUS MODEL

Screw used to tighten/loosen the probe clip for mounting AFM probes in the OLD STYLE holder (pre-2024)

ID 111.738

£ 19.00

Jupiter Probe Holder - Clip Screw (Sides)

Screw used to tighten/loosen the probe clip for mounting AFM probes in the holder (2024+)

ID 002.FHCS.M2X4SST

£ 4.00

Jupiter - Standard Chuck (200mm)

Standard 200mm chuck for general-purpose use.

Can accommodate up to 200mm wafers or up to 8 magnetic puck-mounted samples.

ID 900.008.2

£ 4,165.00

Jupiter - Vaccum Chuck, Scanner Secure Screw

Screw used to fasten Jupiter vacuum chuck to XY scanner.

Sold in packets of 5.

ID 222.211

£ 8.00

Jupiter - Vaccum Chuck, Sealing O Ring

O-ring used to vacuum ports on Jupiter vacuum chuck. Requires sealing screw [222.220] to function.

Screws sold separately. Sold in packets of 5.

ID 230.071

£ 12.00

Jupiter - Vaccum Chuck, Sealing Screw

Screw used to fasten Jupiter vacuum chuck to XY scanner. Sold in packets of 5.

ID 222.220

£ 12.00

Jupiter - Vaccum Tubing (¼" OD x .166 ID)

Clear polyurethane tubing for Jupiter vacuum lines. Sold in 240 in (609 cm) lengths.

ID 231.062

£ 12.00

Phillips WIHA Screwdriver (2mm Flat Tip)

Phillips WIHA screwdriver. Can be used for fastening screws on the Jupiter AFM probe holder and also for other general purpose use. Has a 2mm flat head.

ID 290.110

£ 9.00