The Portable Dry Ice Maker is the fastest way of providing a block of dry ice to your lab. The Portable Dry Ice Maker produces a block of approx 1kg in weight in less than 2 minutes, and all you have to do is connect the unit to a cylinder of CO2, and turn on the tap. Remember, it has to be a liquid cylinder with an internal siphon.
Epoxy resins for the preparation and sectioning of specimens for TEM. 100 resin replaces Epon 812 resin, now unobtainable. The formulation of 100 resin is the same as Epon, but is less viscous than many samples of Epon 812 and is more closely controlled in its manufacture. Epoxide equivalent between 148 and 150. Choose your size from the dropdown menu:
Simplify your lifestyle with this handy Oxford Instruments Branded 8GB USB flash drive. Oxford Instruments Branded 8GB USB flash drive.
The genuine replacement for DAG 915, used widely in electron microscopy and electronic circuitry for capacitor terminations, electrostatic screening, coating of UHF reflectors and electroplating on non-conductors.
Apiezon AP100 Grease is a silcone-free vacuum grease and lubricant, containing PTFE. It is highly lubricating and is used for low vapor pressure sealing and lubrication in high vacuum applications.
Apiezon AP101 is specially formulated as an anti-seize vacuum Grease containing PTFE which is superior with its anti-seize properties. It is silicon-free and is an excellent general purpose, hydrocarbon grease suitable for a variety of scientific applications.
Apiezon L is specially formulated as a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications.
Apiezon Hydrocarbon wax which can be used as permanent or semi-permanent vacuum sealants or mounting media. Apiezon waxes are equally effective at maintaining seals in vacuum systems down to 10-9 torr at 20°C (dependent on the wax) and in systems at small positive pressures. They are excellent waterproof mediums providing a total seal against liquid water and offer superior sealing against water vapour and atmospheric moisture.
Apiezon Hydrocarbon wax which can be used as permanent or semi-permanent vacuum sealants or mounting media. Apiezon waxes are equally effective at maintaining seals in vacuum systems down to 10-9 torr at 20°C (dependent on the wax) and in systems at small positive pressures. They are excellent waterproof mediums providing a total seal against liquid water and offer superior sealing against water vapour and atmospheric moisture.
A new formula of this preparation of fine, pure colloidal graphite in water which may be painted on to surfaces to provide continuous, adherent, dry films of graphite or used to form conductive paths.
Araldite CY212 Resin 500g. Araldite® is also known as Araldite M and is key in the preparation and sectioning of specimens for TEM.
Sloped shoulder polythene wash bottles are available in 250ml and 500ml sizes printed with a choice of liquids and solvents. Choose your bottle from the drop down menu:
This orange blower is a highly effective for dusting surfaces which should not be wiped, perfect for cleaning microanalysis specimens. A simple but effective way to keep your surfaces dust-free.
These boats accommodate several aperture discs which should be heated in a vacuum chamber to bright red heat for cleaning. They are well suited for heat cleaning of molybdenum or tantalum apertures and the evaporation of powders.
Evaporation of braided carbon fibre gives a very reproducible film thickness. Carbon Fibre 0.7g/m 1.0mm dia x 1m Length. Other types available, choose from the drodown menu.
Whatman® qualitative filter papers, Grade 1 circles, diameter of 90 mm. Whatman® papers are known for being synonymous with quality, reliability, and ease of use.
Fast drying, alcohol based silver conductive paint for sample mounting and electrical continuity.
Conductive Silver Pen suitable for affixing samples to SEM stubs, making instant conductive traces. It has a micro tip that creates fine conductive lines on epoxy, glass, plastic and metal surfaces.
A set of 100 cotton tipped applicators for cleaning delicate parts.
Cryo-Aprons offer protection from splashes and ultra-cold applications. Made from state-of-the-art waterproof materials that are lightweight for comfort and ease of movement. (Size: Large)
Cryogenic protective gloves for protecting your hands in industiral settings whilst working with LNG or liquid nitrogen where exposure to cryogenic fluids might exist. (Brown)
PPE Safety kit for protection against splashes and ultra-cold applications when using cryogenic liquid. Each kit includes a pair of Waterproof Cryo-Gloves, a Cryo-Apron and a Cryo-Protection Face Shield. (Size - Extra Large)
A synthetic, water-miscible coolant for sectioning non-ferrous metals.Cutting Fluid 723 provides excellent lubrication and cooling to prevent the microstructures of the materials from being damaged in the cutting process.
DAG 580 is a graphite lubricant which forms a thin, dry film. It is electrically conductive, has low friction, and can be used up to 500°C. It's also a colloidal dispersion of micro-graphite in ethyl alcohol.
DDSA EM grade redistilled. DDSA can be used as a hardener that facilitates the curing the of epoxy resin. DDSA provides a system that fills 15% more volume per pound. Moisture absorption is low and the flexibility / toughness is enhanced.
This high quality precision diamond scribing pen in a chromium case has a twistable barrel to expose or retract the diamond tip. It comes in handy when marking glass slides, it scribes metal, and scores for breaking glass and glass knives. Refills are available 51-1625-1344
This low melting point wax is used for sealing tape boats and Trufs onto glass knives.
Battery operated digital thermometer with stainless steel probe. It has an operating temperature range of -50 to +150°C, with an accuracy of ±1°C.
Some buffers are toxic and should be handled with the same care as fixatives. Sodium Dihydrogen Orthophosphate is a clear, colourless, slightly acid liquid which is soluble in water at all concentrations.
Fluorescent contrast dye to be mixed with clear mounting resins, which highlights porosity and micro-cracks. To be used with filters on a microscope for the best results. Designed to be used with 603 and 603.2 epoxy resins.
A very fine flake silver is suspended in methyl isobutylketone (4-methylpentan-2-one) and forms a thin, smooth, highly conductive silver film which is both adherent and flexible. 50g.
This filter funnel measures 5" in length and is for the transfer of photographic chemicals and is also perfect for decanting liquids into a container or trigger bottle.
A pair of fine nylon gloves to give very good touch sensitivity. These lightweight work gloves are ideal for precise and delicate work that still requires protection such as electronics operations, laboratory work, semiconductors, pharmaceuticals and other precise work. Choose your size from the drop-down menu:
A sampling pen providing a sticky membrane, stable up to 120°C / 110°C, which stops paraffin sections moving, wrinkling or falling off slides. The Fro-Tissuer is used to create a sticky coating that is designed to prevent frozen tissue sections from falling off, moving, or wrinkling on the slide during immunohistostaining procedures. The pen can be used with LAB-SA, PAP/APAAP, ABC, and in conjunction with Invitrogen PAP Pen. The coating is stable up to 110°C.
A general purpose, reinforced red spirit filled thermometer which can also be used as a stirring rod, ideal for Lab Applications.
It is 305mm in length, and calibrated from -20 to +110°C.
Glass pasteur pipettes which are also known as droppers that are used with a bulb for transfer of small volumes of liquids; the pipet typically tapers to a narrow opening. Sold in a pack of 250, these glass pipettes come in two different sizes (this pack measures 5.75 inches - short)
Fibre tip pen dispensing an all purpose glue, useful for mounting particulate samples on SEM stubs. Stick materials together while the glue is wet to create a permanent bond. When dry, the glue will become clear.
These polycarbonate goggles have an exceptionally wide field of vision, anti-mist and anti-scratch coating, and an adjustable ball-pivot strap.
Pen designed to apply a thin layer of adhesive to grids with minimal pressure for tissue mounting or pre-treating before coating with thin films. The adhesive will dry, ready for tissue mounting, in 1 to 2 minutes.
Thermal bath fluids have been carefully selected and proven in long-term service. They are suited for use with heated and refrigerated circulators.
Hexid A4 fluid comes range of carefully formulated products optimised for temperatures from -45°C to 90°C, will help you get the most from your process.
Hexid heat transfer fluids enhance the performance of your demanding chiller applications. A range of carefully formulated products optimised for temperatures from -45°C to 90°C, will help you get the most from your process. (A6 Version)
Fine point writing pen which leaves a mark that can be read in the electron beam of the SEM.
Various grades of diamond polishing paste are available. They are supplied in convenient tubes for dispensing onto polishing cloths or laps, and may also be used for cleaning delicate internal parts of microscopes.
Both oil based (OS type) and water based (W type) lubricating fluids are available for use with Kemet polishing pastes. They assist Kemet Diamond Products to cut and polish more effectively by absorbing frictional heat and diluting the lapping residue.
Kimwipes strong tissue paper wipe is available with a size of 230 x 430mm. They are useful for precision cleaning in laboratory and research environments.
Leit C is a suspension of very fine conducting carbon particles in a volatile carrier, suitable for forming conducting bonds between specimens and stubs. A range of Leit-C products are available, choose the product you require from the dropdown menu.
Products
SERVICES
Software
New