MICROSCOPY SUPPLIES

    • NanoSoft(1)
      • PRODUCTS(1,321)
      • NEW(340)
      • NEW PRODUCTS(340)
      • AFM PROBES(2)
      • LAB SUPPLIES (87)
      • MICROSCOPY SUPPLIES(186)
      • STORAGE(58)
      • TWEEZERS / TOOLS(77)
      • SOFTWARE(6)
      TEM, Grid Dual Holder, Al product photo
      TEM, Grid Dual Holder, Al
      Post Base TEM Grid Holder made from aluminum (Al - non-magnetic).

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0678
      ¥ 184,187
      Pre Order Now
      Very High Resolution Calibration Reference and Traceable Standard for AFM, SEM, Auger, and FIB product photo
      Very High Resolution Calibration Reference and Traceable Standard for AFM, SEM, Auger, and FIB

       Model 70-1D with Cert Unmounted

      For General Purpose and Metrology Microscopes: A precision pattern providing accurate calibration in the horizontal plane for very high resolution, nanometer-scale measurements.

      Period: 70 nm pitch, one-dimensional array. Accurate to +/- 0.25 nm.  Refer to calibration certificate for actual pitch.

      Surface: Silicon Oxide ridges on Silicon, 4 x 3 mm die.  Ridge height (about 35 nm) and width (about 35 nm) are not calibrated.

      This item is on pre-order and will take around 1-2 weeks to arrive.

      ID 51-1625-0689
      ¥ 991,599
      Pre Order Now
      Cryo-Laminate™ Tape product photo
      Cryo-Laminate™ Tape
      This Cryo-Laminate tape protects against extreme cryogenic conditions including liquid and vapor phase liquid nitrogen as well as other chemicals. This ultra-thin cryo laminating tape provides excellent protection against most chemicals and reagents.

      This item is on pre-order and will take between 1 - 2 weeks to arrive.

      ID 51-1625-0604
      ¥ 6,318
      In Stock 4
      Multi Element Block of 15 Standards Auger MAC product photo
      Multi Element Block of 15 Standards Auger MAC
      MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

      This item is on pre-order and will take around 1-2 weeks to arrive.
      ID 51-1625-0687
      ¥ 542,295
      Pre Order Now
      SEM Metallurgical Mount Sample Holder (1.25 inch Dia) product photo
      SEM Metallurgical Mount Sample Holder (1.25 inch Dia)
      These holders with pin stub mounts accept standard metallurgical mounts.
      (1.25 inch diameter)
      ID 51-1625-0763
      ¥ 17,198
      Pre Order Now
      Cavity Slide - Single Depression product photo
      Cavity Slide - Single Depression
      These slides are useful in Light Microscopy applications and work as moist chambers for observing hanging drops.
      ID 51-1625-0755
      ¥ 33,747
      Pre Order Now
      TEM Support Grids 400 Mesh, 3.05mm (Tube of 100) product photo
      TEM Support Grids 400 Mesh, 3.05mm (Tube of 100)
      3.05mm diameter, square mesh copper TEM grids. All grids are available in 3.05mm diameter and some in 2.3mm diameter.
      ID 51-1625-0096
      ¥ 3,645
      In Stock 2
      Alpha/Numeric Index Grids product photo
      Alpha/Numeric Index Grids
      By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/") and (300 Lines/"/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels.

      This item is on pre-order and will take between 1-2 weeks to arrive.

      ID 51-1625-0620
      ¥ 12,960
      Pre Order Now
      Graphene-Enhanced Lacey Carbon TEM Grid 200 (copper) product photo
      Graphene-Enhanced Lacey Carbon TEM Grid 200 (copper)

      Graphene is a single atomic layer of carbon atoms tightly packed in a two-dimensional honeycomb lattice. This novel material is atomically thin, chemically inert, consists of light atoms, and possesses a highly ordered structure. Graphene is electrically and thermally conductive, and is the strongest material ever measured. These remarkable properties make graphene the ideal support film for electron microscopy.

      This item is on pre-order and will take between 1-2 weeks to arrive.

      ID 51-1625-0581
      ¥ 2,700
      Pre Order Now
      Biopunch ID 4.0mm OD 4.41mm (5 Pack) product photo
      Biopunch ID 4.0mm OD 4.41mm (5 Pack)
      The Biopunch is a coring tool designed to core, punch and retrieve samples from thin or soft substrate source materials such as tissue, gels, paper, cloth, leaves, paint chips and films. Each punch consists of a sure grip hollow plastic embossed handle with a razor sharp seamless stainless steel cutting tip protected by a clear removable cap,  individually packaged sterile with lot number and expiration date clearly imprinted on the package.
      ID 51-1625-0851
      ¥ 4,323
      Pre Order Now
      Micrometer Standards 0.1" in 0.001" divisions for reflected light product photo
      Micrometer Standards 0.1" in 0.001" divisions for reflected light
      These Micrometer Scale standards 0.1"; in 0.001" divisions for reflected light. They provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

      This item is on pre-order and will take around 1-2 weeks to arrive.

      ID 51-1625-0664
      ¥ 61,854
      Pre Order Now
      Serialised SEM Specimen Stubs (50 Pack) product photo
      Serialised SEM Specimen Stubs (50 Pack)
      Laser etched serialised standard 12.5mm dia aluminium pin stubs with pre-mounted carbon tabs, suitable for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments.
      ID 51-1625-0811
      ¥ 16,593
      In Stock 2
      Semclip 25mm Pin Mount Double (90 Degrees, 2 Clips) product photo
      Semclip 25mm Pin Mount Double (90 Degrees, 2 Clips)
      Pin stub versions of SEMClip mounts are available in 12.5mm and 25mm diameters.
      ID 51-1625-0813
      ¥ 11,513
      In Stock 2
      Core Sampling Tool product photo
      Core Sampling Tool
      This all new revolutionary multi-purpose sampling tool, has been designed with retractable cutting cannula for easy operation.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0576
      ¥ 1,632
      Pre Order Now
      Standard Reticles - Single Dashed Cross Lines product photo
      Standard Reticles - Single Dashed Cross Lines
      These standard reticles are manufactured to use with microscope eyepieces. High quality, precision made with different designs and styles that help you do your work.
      RET 50, 13 µm Wide, 21 mm Diameter.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0649
      ¥ 29,094
      Pre Order Now
      Hybrid cryo-EM sample storage box product photo
      Hybrid cryo-EM sample storage box
      Pastel coloured very robust Hybrid cryo-EM sample storage boxes that come with unique serial numbers and dedicated wells for unclipped grids and also autogrids. Available with pin lid or without pin lid. 
      ID 51-1625-0865
      ¥ 3,186
      Pre Order Now
      Dissecting Kit in Canvas Holdall product photo
      Dissecting Kit in Canvas Holdall
      Dissection kits in a canvas holdall roll. Available with either reusable scalpels or disposable blade scalpels.
      ID 51-1625-0765
      ¥ 16,331
      Pre Order Now
      TEM Support Grids 300 Mesh, 3.05mm (Tube of 100) product photo
      TEM Support Grids 300 Mesh, 3.05mm (Tube of 100)

      300 mesh, square pattern, 3.05mm diameter TEM grids.

       

      ID 51-1625-0406
      ¥ 4,374
      In Stock 8
      Highly Ordered Pyrolytic Graphite (HOPG) product photo
      Highly Ordered Pyrolytic Graphite (HOPG)
      HOPG is widely used as a substrate for specimens to be examined in scanning probe microscopy. It is also used as a calibration specimen and cleaves almost like mica because of its layered structure. (HOPG 3.5 ± 1.5 Mosaic Spread)
      ID 51-1625-0744
      ¥ 26,272
      Pre Order Now
      Rotary Grid Storage Box for 25 grids product photo
      Rotary Grid Storage Box for 25 grids
      Rotary Grid Storage box that has been designed with the microscopist in mind that stores 25 TEM Grids. They are ideal for both working labs and for longer-term storage.
      ID 51-1625-0882
      ¥ 935
      Pre Order Now
      Tabbed TEM Support Grids 50 Mesh product photo
      Tabbed TEM Support Grids 50 Mesh
      Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 50 mesh. Copper, Nickel or Gold.
      ID 51-1625-0830
      ¥ 5,281
      Pre Order Now
      Polystyrene Latex Particles product photo
      Polystyrene Latex Particles
      This range of polystyrene particles is excellent for SEM calibration purposes. It is possible to derive an internal standard of size by mixing a suitable concentration of these particles with the particles of unknown size being studied.
      ID 51-1625-0847
      ¥ 4,490
      Pre Order Now
      Tabbed TEM Support Grids 400 Mesh product photo
      Tabbed TEM Support Grids 400 Mesh
      Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 400 mesh. Copper, Nickel or Gold.
      ID 51-1625-0837
      ¥ 5,450
      Pre Order Now
      Cryo Ultramicrotome Specimen Pins: Slotted Screw (50 Pack) product photo
      Cryo Ultramicrotome Specimen Pins: Slotted Screw (50 Pack)
      Aluminum specimen mount pin for mounting samples for ultramicrotomy. Available in two types: Slotted Screw and Bullseye.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0633
      ¥ 24,219
      Pre Order Now
      Serialised SEM Specimen Stub with Al core Carbon Tab & Tube (10 Pack) product photo
      Serialised SEM Specimen Stub with Al core Carbon Tab & Tube (10 Pack)
      Serialised standard 12.5mm dia Laser etched aluminium pin stubs with pre-mounted high conductivity aluminium cored carbon tabs in a Pack of 10.
      ID 51-1625-0802
      ¥ 7,527
      Pre Order Now
      Fuchs Resenthal Counting Chamber product photo
      Fuchs Resenthal Counting Chamber
      Designed for counting leukocytes, eosinophils and cells in cerebrospinal fluid. Grid pattern is etched directly onto the glass surface. The chamber is 0.2 mm, deep.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0671
      ¥ 97,711
      Pre Order Now
      Semclip 18mm Pin Mount with 1 Clip product photo
      Semclip 18mm Pin Mount with 1 Clip
      Pin stub versions of SEMClip mounts are available in 18 to 50mm diameters, and can be used with all SEMs using pin stubs.
      ID 51-1625-0812
      ¥ 6,527
      Pre Order Now
      Micro Pipettes, intraMARK (Pk 250) product photo
      Micro Pipettes, intraMARK (Pk 250)
      Glass micropipettes, that come with a with ring mark for volumetric measurements. They contain the stated volume when filled from one end to the ring mark for volumetric precise measurements.
      ID 51-1625-0477
      ¥ 13,312
      Pre Order Now
      Multi Element Block of 5 Standards Auger MAC product photo
      Multi Element Block of 5 Standards Auger MAC
      MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0680
      ¥ 266,058
      Pre Order Now
      Polypropylene Beaker product photo
      Polypropylene Beaker
      Plastic Beaker for general laboratory use. This Polypropylene Beaker will withstand temperatures up to 135°C. (500ml size)

      This item is on pre-order and will take between 1 - 2 weeks to arrive.
      ID 51-1625-0603
      ¥ 6,156
      Pre Order Now
      Micrometer Standards – PS4 with NPL certificate product photo
      Micrometer Standards – PS4 with NPL certificate
      These calibrated standards provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

      This item is on pre-order and will take around 1-2 weeks to arrive.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0681
      ¥ 271,050
      Pre Order Now
      Graphene on Silicon Nitride TEM Grids (2.5 µm holes) product photo
      Graphene on Silicon Nitride TEM Grids (2.5 µm holes)
      200 µm thick 3.0 mm hexagonal silicon substrate with a 0.5 x 0.5 mm aperture and 200 nm thick silicon nitride membrane with approximately 6,400 2.5 µm holes.

       This item is on pre-order and will take around 1-2 weeks to arrive.

      ID 51-1625-0661
      ¥ 44,753
      Pre Order Now
      Tabbed TEM Support Slot Grids, 2mm x 1mm product photo
      Tabbed TEM Support Slot Grids, 2mm x 1mm
      Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 200 mesh. Copper, Nickel or Gold.
      ID 51-1625-0832
      ¥ 5,281
      Pre Order Now
      15mm Gold Coated Specimen Discs for AFM (5 pack) product photo
      15mm Gold Coated Specimen Discs for AFM (5 pack)
      These metal 15mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0617
      ¥ 10,449
      Pre Order Now
      Standard Reticles -  Single Solid Cross Lines product photo
      Standard Reticles - Single Solid Cross Lines
      These standard reticles are manufactured to use with microscope eyepieces. High quality, precision made with different designs and styles that help you do your work:

      RET 51, 63 µm Wide, 19 mm Diameter

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0650
      ¥ 29,094
      Pre Order Now
      Hexagonal Pattern Mesh TEM Support Grids product photo
      Hexagonal Pattern Mesh TEM Support Grids
      Hexagonal pattern, 100 mesh grids offer an alternative to the standard square mesh pattern, providing maximum support for any given mesh repeat distance.
      ID 51-1625-0410
      ¥ 3,168
      Pre Order Now
      Bright Line Counting Chamber product photo
      Bright Line Counting Chamber

      Designed by Leica for accurate counting of blood cells platelets, dust/yeast cluster and specimen samples. Sharp contrast from rhodium plated on "V-Load". Triple dividing lines clearly delineate counting area for accurate and precise results.

      This item is on pre-order and will take between 1-2 weeks to arrive.

      ID 51-1625-0670
      ¥ 84,698
      Pre Order Now
      Clear Culture Dish product photo
      Clear Culture Dish

      Cover Glass Bottom Sterile Culture Dishes Ideal for fluorescence microscopy, confocal (laser) microscopy, high-resolution image analysis, cell culture, and electrophysiology.

      This item is on pre-order and will take between 1-2 weeks to arrive.

      ID 51-1625-0634
      ¥ 24,395
      Pre Order Now
      Plastic cryo grid box (Single) product photo
      Plastic cryo grid box (Single)
      Tested for biodegradability and durability, these plastic grid boxes made from a durable polymer are new and available in 3 different colours for maximum contrast. Suitable for use with both unclipped and clipped standard 3 mm electron microscopy grids. 
      ID 51-1625-0819
      ¥ 5,771
      Pre Order Now
      Micrometer Standards –  PS1 with UKAS Certificate product photo
      Micrometer Standards – PS1 with UKAS Certificate
      These calibrated standards provide traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, which is necessary under ISO provisions.

      This item is on pre-order and will take around 1-2 weeks to arrive.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0676
      ¥ 134,628
      Pre Order Now
      10mm Gold Coated Specimen Discs for AFM (5 pack) product photo
      10mm Gold Coated Specimen Discs for AFM (5 pack)
      These metal 10mm specimen discs are high quality – made of magnetic stainless steel coated with 1µm gold. They have smooth edges and consistently flat surfaces to ensure secure holding. Specimens can be mounted directly on the metal discs with double sided tape, epoxy or conductive paste. If a mica specimen support is needed, the mica discs can be easily mounted on the metal support discs.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0612
      ¥ 9,477
      Pre Order Now
      Platinum Round Coverglasses (12mm, #1) product photo
      Platinum Round Coverglasses (12mm, #1)
      Made of a water-white colorless borosilicate glass, with an optimum hydrolytic resistance. Ultra-thin. Performs exceptionally well on all automated glass coverslippers. Available in multiple dimensions.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0669
      ¥ 79,170
      Pre Order Now
      Silicon Nitride Lift-Out TEM Windows product photo
      Silicon Nitride Lift-Out TEM Windows

      Low-stress silicon nitride for lift-out applications. Available with or without gold contacts.

      This item is on pre-order and will take between 1-2 weeks to arrive.



      ID 51-1625-0614
      ¥ 9,639
      Pre Order Now
      Silver Coated Microscope Slide product photo
      Silver Coated Microscope Slide
      We now offer a variety of economically priced silver coated substrates. All coatings are deposited under vacuum using electron beam evaporation. These high quality substrates are coated with 500 Å (50 nm) of silver, with a thin titanium adhesion layer (2-7 nm) between the glass and silver coating. This adhesion layer can also be replaced with chromium upon request.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0618
      ¥ 12,393
      In Stock 5
      Serialised SEM Specimen Stub with Leit Carbon Tab in tube (10 Pack) product photo
      Serialised SEM Specimen Stub with Leit Carbon Tab in tube (10 Pack)
      Serialised standard 12.5mm dia aluminium pin stubs with pre-mounted leit carbon tab in a tube. Each stub has a unique serial number for sample identification. Suitable for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. Also come in a 50 pack. (51-1625-0740)
       

       
      ID 51-1625-0809
      ¥ 6,744
      Pre Order Now
      TEM, Grid Dual Holder, SS product photo
      TEM, Grid Dual Holder, SS
      Post Base TEM Grid Holder.  Stainless steel (SS - very slightly magnetic), can affect imaging in UHS mode.

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0679
      ¥ 187,873
      Pre Order Now
      Multi Element Block of 10 Standards Auger MAC product photo
      Multi Element Block of 10 Standards Auger MAC
      MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES).

      This item is on pre-order and will take between 1-2 weeks to arrive.
      ID 51-1625-0685
      ¥ 388,820
      Pre Order Now
      Silicon nitride membranes - 200um substrate thickness, multi-frame array (7x7 array) product photo
      Silicon nitride membranes - 200um substrate thickness, multi-frame array (7x7 array)
      200µm substrate thickness, multi-frame array (7 x 7 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes.
      ID 51-1625-0709
      ¥ 95,137
      Pre Order Now
      Bright Line Chamber Only product photo
      Bright Line Chamber Only

      Designed by Leica for accurate counting of blood cells platelets, dust/yeast cluster and specimen samples. Sharp contrast from rhodium plated on "V-Load". Triple dividing lines clearly delineate counting area for accurate and precise results. Molded from a single piece of thermal and shock resistant glass with a polished chamber and cover glass assuring precise capillary loading and even cell distribution. Fluid volume is 0.1 mm3/mm2 and 0.00025 mm2 per each square.

      This item is on pre-order and will take between 1-2 weeks to arrive.

      ID 51-1625-0663
      ¥ 48,591
      Pre Order Now
      Silicon nitride membranes - 100nm Si Nitride 0.5mm x 0.5mm EA (7x7 array) product photo
      Silicon nitride membranes - 100nm Si Nitride 0.5mm x 0.5mm EA (7x7 array)
      200µm substrate thickness, multi-frame array (7 x 7 array) with 20, 30, 50, 75, 100, 150, 200 or 500nm Silicon nitride membranes.
      ID 51-1625-0713
      ¥ 76,024
      Pre Order Now
      Swiss Line Wafer Handling Tweezer (Style 41LB8) product photo
      Swiss Line Wafer Handling Tweezer (Style 41LB8)
      Swiss line wafer handling tweezers are suitable to delicate applications which require holding a wafer.

      This item is on pre-order and will take between 1 - 2 weeks to arrive.

      ID 51-1625-0607
      ¥ 7,661
      Pre Order Now

      Recently Viewed