Cryogen Level Probes and Cold Traps

    • PRODUCTS(1,303)
    • GENERAL CONSUMABLES(584)
    • MICROSCOPY SUPPLIES(485)
    • SYSTEM SPARES(281)
    • AFM PROBES(46)
    • NEW(349)
    • SALE(136)
    • SOFTWARE(3)
    • SUPPORT(9)
    • TRAINING(25)
    Tissue-Tek Cryomold Standard Mould 25x20x5mm (100 Pk) product photo
    Tissue-Tek Cryomold Standard Mould 25x20x5mm (100 Pk)
    Disposable plastic Cryomold® moulds
    ID 51-1625-0482
    $ 71.61
    Pre Order Now
    Transport Trolley/Pouring Frame (for Cryolab 25) product photo
    Transport Trolley/Pouring Frame (for Cryolab 25)
    A transport trolleys for the Cryolab 25 series of Liquid Nitrogen Dewars. State of the art super-insulation and ultra-high vacuum techniques ensure unrivalled thermal efficiency and vacuum life.
    ID 51-1625-0029
    $ 700.46
    Pre Order Now
    Tweezers - opening 1/2 - 3/4 inches product photo
    Tweezers - opening 1/2 - 3/4 inches
    Tweezers made from Dumoxel, opening 1/2 - 3/4 inch for handling SEM specimen stubs and other small items.
    ID 51-1625-0184
    $ 56.00
    In Stock 6
    Dumont Tweezers - opening 1/4 - 3/8 inch product photo
    Dumont Tweezers - opening 1/4 - 3/8 inch
    Tweezers made from Dumoxel, opening 1/4 - 3/8 inch for handling SEM specimen stubs and other small items.
    ID 51-1625-0562
    $ 56.86
    Pre Order Now
    Universal Tin on Carbon product photo
    Universal Tin on Carbon
    Universal resolution test specimen with a particle size range from approximately <5nm - 30um. This tin on carbon test specimen has a very wide size range of tin spheres which give high contrast when imaged in the SEM.

    ID 51-1625-0551
    $ 124.16
    $ 206.93
    In Stock 3
    Universal Tin on Carbon Specimen Unmounted product photo
    Universal Tin on Carbon Specimen Unmounted
    Universal resolution test specimen with a particle size range from approximately <5nm - 30um. This tin on carbon test specimen has a very wide size range of tin spheres which give high contrast when imaged in the SEM.
    ID 51-1625-0552
    $ 211.30
    In Stock 2
    Universal Tin on Carbon Specimen on Pin Stub product photo
    Universal Tin on Carbon Specimen on Pin Stub
    Universal resolution test specimen with a particle size range from approximately 5nm - 30um
    ID 51-1625-0299
    $ 215.23
    In Stock 4
    VLV CONTR LN2 product photo
    VLV CONTR LN2
    LN2 CONTROL VALVE
    ID 94-GVV0560
    $ 1,283.60
    In Stock 1
    Vacuum Capacitor AMU product photo
    Vacuum Capacitor AMU
     
    Upgrading to latest AMU will include a firmware update and replacement of all parts. There will be a reduction in system failures, resulting in a decrease in cost of overall ownership of the system.

    The Vac cap AMU design has eliminated any arching possibility and will improve MTBF for air vane configured tools.
    ID 94-KT1011727
    For availability and prices please request a quote.
    WAFER CLAMP 4 INCH QUARTZ product photo
    WAFER CLAMP 4 INCH QUARTZ
    4" WAFER CLAMP FULL LIP
    ID 94-MD91B25973
    $ 3,338.83
    In Stock 2
    WAFER CLAMP 6 INCH QUARTZ product photo
    WAFER CLAMP 6 INCH QUARTZ
    WAFER CLAMP 6" QUARTZ SERIES ll
    ID 94-MD91B25974
    $ 2,942.29
    In Stock 1
    WAFER CLAMP 8 INCH QUARTZ product photo
    WAFER CLAMP 8 INCH QUARTZ
    6" WAFER CLAMP FULL LIP
    ID 94-MD91B25976
    $ 3,642.85
    In Stock 1
    WDS Standards block (20 standards) product photo
    WDS Standards block (20 standards)
    WDS Standards block (20 standards)
    ID 51-1606-045
    $ 6,199.00
    Pre Order Now
    Wenol metal polish product photo
    Wenol metal polish
    Wenol metal polish is specially recommended for cleaning parts of the electron microscope. The polish residue should be removed by buffing and the components washed ultrasonically using a suitable fast drying solvent.
    ID 51-1625-0022
    $ 24.86
    In Stock 4
    White Box for 10 Storage Tubes product photo
    White Box for 10 Storage Tubes
    Strong cardboard box with an insert which holds 10 x SEM stub storage tubes.
    ID 51-1625-0279
    $ 8.98
    $ 14.96
    In Stock 15
    Omniprobe Xtreme Access Short-Cut™ probe tips, 6deg taper angle (10) product photo
    Omniprobe Xtreme Access Short-Cut™ probe tips, 6deg taper angle (10)
    A box of Omniprobe Xtreme Access Short-Cut probe tips with a 6 degree taper angle. Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service.

    ID PT-0001.06.01
    $ 190.00
    Pre Order Now
    Centering Ring with Viton 'O'-Ring (used in vacuum applications) product photo
    Centering Ring with Viton 'O'-Ring (used in vacuum applications)
    NW/KF 10mm Centering Ring with Viton 'O-ring. Centering Rings are used to connect two flanges of different internal sizes. This creates a vacuum seal with the use of a clamp. (10mm size)
    ID A4-201
    $ 17.50
    $ 25.00
    In Stock 5
    Silicon Block Embedding Mould product photo
    Silicon Block Embedding Mould
    FDA grade silicone rubber flat embedding moulds with a choice of cavities.
    Blue silicone rubber mould with 24 + 3 numbered cavities. It contains three special cavities for multiple specimen embedding.
    ID 51-1625-0456
    $ 57.80
    Pre Order Now
    Molybdenum Spray Aperture (12.68 x 0.25mm) product photo
    Molybdenum Spray Aperture (12.68 x 0.25mm)
    Molybdenum Spray Aperture which can be used in Cambridge/LEO/Zeiss and Camscan scanning electron microscopes. Aperture diameter 12.68mm, thickness 0.25mm. Hole 1500um.

    Please note: This item is on preorder and the current lead time is around 3 months

    ID 51-1625-0001
    $ 178.61
    Pre Order Now
    Membrane Box with hinged lid and lock product photo
    Membrane Box with hinged lid and lock
    Singular clear polystyrene membrane box containing thin Platilon membranes, ideally used for the safe transit of small, delicate objects such as semiconductors, crystals, wafers, crystal substrates, and optical components. Single box with hinged lid and locking lips - 125m x 75mm x 25mm.
    ID 51-1625-0452
    $ 30.09
    In Stock 5
    Indium Wire - Supplied by the metre product photo
    Indium Wire - Supplied by the metre
    Indium Wire 1.0mm Dia (Supplied by the metre)

    Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres. 
    ID C4-102
    $ 67.00
    In Stock 5
    Dumont N7 Crossover tweezers in Dumoxel - 0.17 x 0.10mm tip product photo
    Dumont N7 Crossover tweezers in Dumoxel - 0.17 x 0.10mm tip
    High precision crossover tweezers in Dumoxel. Self-closing, fine, curved 0.17 x 0.10mm tips. Length 115mm
    ID 51-1625-0165
    $ 50.37
    In Stock 5
    TKD EBSD sample holder product photo
    TKD EBSD sample holder
    TKD sample holder designed to be used together with the standard universal pre-tilted sample holder supplied with the Aztec EBSD system. Specifically designed for TKD analysis, it provides a way of easy mounting and positioning of the thin sample.  Once mounted, the user uses the standard AZtec EBSD system to acquire and analyse the results.
    ID 51-1120-408
    $ 1,040.00
    Pre Order Now
    Microstat N Top Window product photo
    Microstat N Top Window
    Microstat N Top Window with Spectrosil B 25mm x 1.5mm
    ID A9-813
    $ 840.34
    Pre Order Now
    Aluminium Wire (10ft) product photo
    Aluminium Wire (10ft)
    High Purity, vacuum grade aluminium wire. This metal wire is suitable for scanning and electron microscopy techniques.

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0578
    $ 14.72
    Pre Order Now
    Cryo-Laminate™ Tape product photo
    Cryo-Laminate™ Tape

    This Cryo-Laminate tape protects against extreme cryogenic conditions including liquid and vapor phase liquid nitrogen as well as other chemicals. This ultra-thin cryo laminating tape provides excellent protection against most chemicals and reagents.

    ID 51-1625-0604
    $ 42.12
    Pre Order Now
    SCOUT-150-RAl product photo
    SCOUT-150-RAl

    Tapping / Non-Contact - Silicon AFM Probe with Al reflex coating. Each pack contains 10 probes.

    ID 817.NN.SCOUT150RAL
    $ 350.00

    Quantity Discounts

    Buy 5+ items ($ 297.50 each)
    In Stock 5
    Flexible Line NW16 Fittings product photo
    Flexible Line NW16 Fittings
    Corrugated Flexible Pumping Line for transferring liquids and gases where high and low temperatures, or corrosion are important factors. (NW16 Fittings - 3metre)
    ID C1-903
    $ 370.00
    In Stock 2
    Replacement NMR O-ring Set (57-DLN4964) product photo
    Replacement NMR O-ring Set (57-DLN4964)
    Replacement NMR O-ring set for the D15000 system.
    ID N3-104
    $ 499.00
    Pre Order Now
    Flexible Line NW40 Fittings product photo
    Flexible Line NW40 Fittings
    Corrugated Flexible Pumping Line for transferring liquids and gases where high and low temperatures, or corrosion are important factors. (NW40 Fittings - 2metres)
    ID C1-908
    $ 466.00
    Pre Order Now
    SEM Metallurgical Mount Sample Holder (1.25 inch Dia) product photo
    SEM Metallurgical Mount Sample Holder (1.25 inch Dia)
    These holders with pin stub mounts accept standard metallurgical mounts.
    (1.25 inch diameter)
    ID 51-1625-0763
    $ 116.20
    Pre Order Now
    Cavity Slide - Single Depression product photo
    Cavity Slide - Single Depression
    These slides are useful in Light Microscopy applications and work as moist chambers for observing hanging drops.
    ID 51-1625-0755
    $ 314.97
    Pre Order Now
    Protective Cover Assembly X-ACT product photo
    Protective Cover Assembly X-ACT
    Protective outer cover for the X-ACT detector. 
    ID 51-1388-346
    $ 519.00
    Pre Order Now
    Sintered Impedance product photo
    Sintered Impedance
    A sintered main impedance used on a Triton dilution refrigerator. Stainless steel, 9sccm.
    ID SP-040
    $ 584.50
    $ 835.00
    In Stock 2
    Dumont HP Tweezers 5 in Stainless Steel - 0.10mm x 0.06mm Tip product photo
    Dumont HP Tweezers 5 in Stainless Steel - 0.10mm x 0.06mm Tip
    High precision grade Stainless Steel tweezers 5. Straight, extra fine tips. Length 110mm. Tip measures 0.10mm x 0.06mm
    ID 51-1625-0164
    $ 40.91
    In Stock 4
    Cryo-EM Pucks - standard, 12 hole (set of 10) product photo
    Cryo-EM Pucks - standard, 12 hole (set of 10)
    Cryo-pucks for easy organisation of sample storage and transport for Cryo-EM specimen grids under cryogenic conditions. The Cryo-EM Pucks feature 12 numbered wells, a see-through lid and easy-access tweezer notches for easy retrieving. This is a set of 10.
    ID 51-1625-0374
    $ 1,913.00
    Pre Order Now
    Alpha/Numeric Index Grids product photo
    Alpha/Numeric Index Grids
    By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/") and (300 Lines/"/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels.

    This item is on pre-order and will take between 1-2 weeks to arrive.

    ID 51-1625-0620
    $ 86.40
    Pre Order Now
    Microstat He Window Flange product photo
    Microstat He Window Flange
    Microstat He Window Flange, Spec B, 10mm x 0.5mm (QOVC05M2)
    ID A9-801
    $ 700.00
    Pre Order Now
    Vacuum Sample Support Tube product photo
    Vacuum Sample Support Tube
    Replacement ESR Vacuum Sample Support Tube (old style)
    ID A5-202
    $ 342.00
    In Stock 3
    Wafer Trays product photo
    Wafer Trays
    Wafer Trays which have been specifically designed for the storage and transport of semiconductor wafers or other delicate objects. The wafer is held in place by a spider spring and locking cap designed to restrain the wafer with minimum contact and pressure.
    ID 51-1625-0724
    $ 334.38
    Pre Order Now
    TEM Support Grids 400 Mesh, 3.05mm (Tube of 100) product photo
    TEM Support Grids 400 Mesh, 3.05mm (Tube of 100)
    3.05mm diameter, square mesh copper TEM grids. All grids are available in 3.05mm diameter and some in 2.3mm diameter.
    ID 51-1625-0096
    $ 34.02
    Pre Order Now
    Sticky Swabs product photo
    Sticky Swabs
    Available in three sizes: 1 mm, 2 mm, and 3 mm, along with various pack sizes. ESD safe. Dust-free sticky swabs are specially used and designed for a high degree dust-free environment (class 10-100).

    This item is on pre-order and will take between 1-2 weeks to arrive.
    ID 51-1625-0586
    $ 28.20
    Pre Order Now
    Tanner Rectangle Coverglass product photo
    Tanner Rectangle Coverglass
    Tanner Scientific® Coverglass is suitable for a host of laboratory applications ranging from histopathology, cytology, microbiology and life sciences.

    This item is on pre-order and will take between 1 - 2 weeks to arrive.
    ID 51-1625-0601
    $ 41.04
    Pre Order Now
    Loctite 460 Sample Bonding Adhesive product photo
    Loctite 460 Sample Bonding Adhesive

    Loctite® 460 is a fast curing, low odour, low viscosity glue which can be used as an alternative to wax for mounting samples on glass for TEM/FIB thinning. 50g. 

    ID 51-1625-0791
    $ 184.50
    In Stock 2
    Dumont 7A Stainless Steel HP Tweezers - 0.24 x 0.16mm tip product photo
    Dumont 7A Stainless Steel HP Tweezers - 0.24 x 0.16mm tip
    High precision medical grade Stainless Steel tweezers by Dumont. Strong, fine, flat tips. Length 110mm. 0.24 x 0.16mm tip.
    ID 51-1625-0244
    $ 40.34
    In Stock 8
    Conductive Carbon Adhesive Tape product photo
    Conductive Carbon Adhesive Tape
    A high quality, very electrically conductive carbon adhesive tape suitable for SEM or EDX applications. The conductive adhesive is a carbon-filled acrylic adhesive, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol or alcohols. Temperature maximum is 60°C (140°F). (12mm width, 20m reel)
    ID 51-1625-0228
    $ 68.93
    In Stock 15
    Biopunch ID 4.0mm OD 4.41mm (5 Pack) product photo
    Biopunch ID 4.0mm OD 4.41mm (5 Pack)
    The Biopunch is a coring tool designed to core, punch and retrieve samples from thin or soft substrate source materials such as tissue, gels, paper, cloth, leaves, paint chips and films. Each punch consists of a sure grip hollow plastic embossed handle with a razor sharp seamless stainless steel cutting tip protected by a clear removable cap,  individually packaged sterile with lot number and expiration date clearly imprinted on the package.
    ID 51-1625-0851
    $ 29.21
    Pre Order Now
    Aluminium pin stubs (Pack of 50) product photo
    Aluminium pin stubs (Pack of 50)
    Aluminium pin stubs, 32mm in diameter. SEM Specimen Stubs for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. Pin length 8mm. Pack of 50.
    ID 51-1625-0259
    $ 77.24
    $ 128.73
    In Stock 4
    Pfeiffer Turbo-Cube OVC pump with gauge and cable product photo
    Pfeiffer Turbo-Cube OVC pump with gauge and cable
    Pfeiffer Turbo-Cube OVC pump with gauge and cable. 110V.
    This large capacity, compact turbo pumping station offers the additional ability of evacuating large volumes such as those of magnet dewars.
    ID H4-502
    $ 18,649.00
    Pre Order Now
    Microstat N Bottom Window product photo
    Microstat N Bottom Window
    Microstat N Bottom Window with Spec B 10mmx0.5mm
    ID A9-812
    $ 1,029.00
    Pre Order Now
    Flexible Line NW25 Fittings product photo
    Flexible Line NW25 Fittings
    Corrugated Flexible Pumping Line for transferring liquids and gases where high and low temperatures, or corrosion are important factors. (NW25 Fittings - 3metre)
    ID C1-906
    $ 345.00
    Pre Order Now