Model 70-1D with Cert Unmounted
For General Purpose and Metrology Microscopes: A precision pattern providing accurate calibration in the horizontal plane for very high resolution, nanometer-scale measurements.
Period: 70 nm pitch, one-dimensional array. Accurate to +/- 0.25 nm. Refer to calibration certificate for actual pitch.
Surface: Silicon Oxide ridges on Silicon, 4 x 3 mm die. Ridge height (about 35 nm) and width (about 35 nm) are not calibrated.
This item is on pre-order and will take around 1-2 weeks to arrive.
By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/") and (300 Lines/"/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels.
This item is on pre-order and will take between 1-2 weeks to arrive.
3.05mm diameter, square mesh copper TEM grids. All grids are available in 3.05mm diameter and some in 2.3mm diameter.
2mm diameter, 0.6mm thick. Molybdenum. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
Assorted Aluminium SEM Specimen Stubs for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. 12.5mm dia, choose your type and pack size from the dropdown menu.
(LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS, 45° chamfer. Aluminium. 10 pack)
Aluminium pin stubs, 32mm in diameter. SEM Specimen Stubs for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments. Pin length 8mm. Pack of 50.
A box of 100 Omniprobe® 3 post copper lift-out TEM grids which have been specifically designed for in-situ lift-out. These copper grids include multiple indexed mounting locations with both vertical bars and “V” shaped attachment surfaces and have a 3mm diameter. The Omniprobe® grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts. For more information of which grid you should us please see: What Grid Should I Use for Lift-out? (Blog)
Plastic storage boxes with inserts and hinged lid holding 8 x 25.4/32mm dia SEM pin stubs or 32mm dia re-entrant stubs.
Platinum Aperture 3.04mm dia x 0.25mm, Hole 5um. Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
SEM Specimen Stubs, 10mm dia, 10mm high, made of carbon. Supplied individually. Other variations available, choose from the dropdown menu.
Laser etched serialised standard 12.5mm dia aluminium pin stubs with pre-mounted carbon tabs, suitable for LEO/CAMBRIDGE, FEI/PHILIPS, CAMSCAN, TESCAN, ZEISS instruments.
Lightweight, stackable, plastic stub storage boxes holding 12 x 12.5mm pin stubs, 12 x 10mm cylinder stubs or 3 x re-entrant stubs. Choose the type you require from the dropdown menu:
A pack of 10 low profile aluminium flat pin stubs which accommodate specimens with small working distances in FIB applications.
12.5mm aluminium pin stub with a slot and two grub screws, allowing specimens to be clamped for examination.(Sold as singles)
300 mesh, square pattern, 3.05mm diameter TEM grids.
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 400 mesh. Copper, Nickel or Gold.
Tabbed grids offer easier handling and help to avoid contamination, allowing grids to be held securely for spraying, rinsing and drying.Square pattern, 50 mesh. Copper, Nickel or Gold.
3.00mm dia, 0.25mm thick. Molybdenum. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
Omniprobe® Simple beryllium half ring grids, 3mm diameter. The metal is unaffected by air or water, even at red heat. Thickness (nominal) : 25 μm.
Finder grid useful for asbestos reference index. 200 mesh, 3.05mm diameter - Copper.
Storage box for a wide range of SEM stubs including 12.5mm, 25mm and 32mm pin stubs, 10mm and 15mm cylinder stubs and 15mm M4 threaded stubs. The dimensions of the box are: 121 x 77 x 34mm.
Negatively stained catalase crystals show lattice plane spacings of approximately 8.75nm and 6.85nm very clearly (using TEM and STEM). They are valuable for high magnification calibration.
Platinum Aperture 3mm dia x 0.1mm, Hole 750um.
Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray
Storage of up to 5 tubes in liquid nitrogen containers such as Dewar flask. Use in liquid and vapor phase; Canes bend to fit all major cryogenic vial brands.
Evaporation of braided carbon fibre gives a very reproducible film thickness. Carbon Fibre 0.7g/m 1.0mm dia x 1m Length. Other types available, choose from the drodown menu.
Epoxy resins for the preparation and sectioning of specimens for TEM. 100 resin replaces Epon 812 resin, now unobtainable. The formulation of 100 resin is the same as Epon, but is less viscous than many samples of Epon 812 and is more closely controlled in its manufacture. Epoxide equivalent between 148 and 150. Choose your size from the dropdown menu:
200 µm thick 3.0 mm hexagonal silicon substrate with a 0.5 x 0.5 mm aperture and 200 nm thick silicon nitride membrane with approximately 6,400 2.5 µm holes.
50 mesh, square pattern, 3.05mm diameter TEM grids. Copper.
2mm dia, 0.1mm thick. Platinum/iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems. Hole 50um
This range of carbon films has been prepared to provide very convenient, ready-to-use specimen support and come with the addition of a layer of evaporated carbon on nickel grids.
Hexagonal pattern copper grids offer an alternative to the standard square mesh pattern, providing maximum support for any given mesh repeat distance. Choose your mesh size from the dropdown menu:
2mm dia, 0.6mm thick. Platinum/Iridium. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.
Formvar coated grids without a carbon layer are suitable for TEM applications up to 100kV.
Low-stress silicon nitride for lift-out applications. Available with or without gold contacts.
This item is on pre-order and will take between 1-2 weeks to arrive.
Metallised Aluminium Tape with Adhesive Backing - 25mm x 55m
New Scanning Electron Microscopy Pin Stubs by PELCO. These new fundamentally improved pin stubs are for correlative, corroborative and repetitive microscopy and repetitive SEM imaging/analysis and specimen preparation. Choose your size from the dropdown menu. 12.7 x 12.7mm (1/2" x 1/2")
Being stable and highly reproducible, this is a standard resolution test for transmission electron microscopes. Graphitised carbon black.
Graphene layers of 4 optional thicknesses (1, 2, 3 - 5 or 6 - 8 layers) of CVD graphene on TEM grids. Available on other grid types, please enquire. Supplied in a pack of 6.
Square pattern, 200 mesh TEM support grids in 3.05mm diameter. Choose the grids you require from the dropdown menu:
SEM Specimen Stubs for LEO/ZEISS instruments. 25mm dia, pin length 6mm. Aluminium.
Slot grids are suitable for specimen support when viewing entire large cells for serial sections where grid bars may interfere with sequential information. We sell them in copper and nickel. Choose your preferred type from the dropdown menu:
A range of diamond abrasive strips and sheets with resin-bonded polishing powder on a polyester backing. Waterproof bonding ensures that polishing particles remain fixed to the backing. (70mm Diamond polishing strip, 15µm)
600 mesh, square pattern, 3.05mm diameter TEM grids. They come in Copper, Gold and Copper/Palladium. Choose the material you require from the dropdown menu:
The evaporated platinum/iridium specimen is supplied on a perforated carbon support film that provides holes for ease of focus and astigmatism correction.
This specimen is one of the quickest and easiest to use for performance checks since it gives information about nearly all causes of loss of resolution.
A box of 100 Omniprobe® 4 post copper TEM lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, two with vertical bar attachment surfaces and two with "V" shaped alighment surfaces. Need some guidance selecting? What Grid Should I Use for Lift-out? (Blog)
12.5mm dia cylinder stub adaptor / converter for JEOL, they accommodate the standard pin type stub format of the European and USA manufacturers.
Shadow cast carbon replicas of diffraction line gratings - 2160 Lines/mm Diffraction Grating Replica 3mm. Shadow cast carbon replicas of diffraction line gratings (spacing 462.9 nm) which are used typically for calibrating electron-optical magnifications up to the x80,000 to x100,000 range.
Numerous images of this material appear in literature on transmission electron microscopy. The spacing gives a convenient test, but the specimens are beam sensitive and quickly lose their crystalline structure under the electron beam.