Box of 10 custom dual taper narrow width sharp tip made from tungsten. The tip radius is 0.5 µm with 8 to 10° taper angle for maximum lifetime service. For use with Omniprobe AutoProbe™ 200 and 100 systems.
Box of 10 custom made Omniprobe AutoProbe™ probe tips designed with a nickel tube shank and tungsten tip. Tip radius is 0.5µm with 13° taper angle for maximum lifetime service.
Omniprobe AutoProbe™ 200/100.7 standard width probe tips in an all tungsten design with tip radius of 0.5µm. Supplied in a box of 10.
Custom made probe tips for the AutoProbe™ 250 & 200 systems. Compatible with short-cut system. All-tungsten design with a 0.508mm (0.020") shank diameter. The tip radius better than 0.5µm with a taper of 6° taper angle for greater precision.
Custom designed tungsten keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems. Supplied in a 20 pack.
Custom keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a flat on the reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems.
Custom made OmniProbe AutoProbe™ 300 400 Probe Tips for FEI SDB Front Port. In-situ width (Tungsten) needle with stainless steel shank. Supplied in a box of 20.
A box of 20 In-situ probe tips for the Omniprobe AutoProbe™ 300/400 systems - they have a custom tungsten tip with a stainless steel shank for use with the AutoProbe™ 300/400, in-situ probe tip exchange systems and is Short-Cut™ compatible. Tip radius is 0.5 µm with 8-10° taper angle.
Low-Magnetic 11mm custom etch design. Custom made In-situ probe tips for OmniProbe® AutoProbe™ 300/400L systems for tip exchange. Tungsten tip with stainless steel shank, tip radius is 0.5µm with an 8-10° taper angle.
OmniProbe® 400L Low-Magnetic Low profile BX20 probe tips for in situ. Low profile dual taper design includes these features: 6° taper angle with a tip .
A box of Omniprobe Xtreme Access Short-Cut probe tips with a 6 degree taper angle. Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service.
Probe shaft set screws that come in a pack of 10 and are for use with the Omniprobe Autoprobe™200 and 400 systems.
Products
Training
Support
Software
New.svg)
Offers
