Buy spares and accessories online

Low KV Tin on Carbon Specimen Unmounted product photo

Low voltage resolution test specimen with a particle size range from approximately <20 - 400nm.

ID 51-1625-0556

£ 144.46

In Stock 3

Low profile TEM grid holder with 2 sample pucks

Dual TEM low profile grid holder / sample holder for FIB and SEM/FIB systems with stations for 2 TEM lift-out grids and 2 sample mounts. Made from aluminium.

ID TGH-0001.25.00

£ 1,050.00

In Stock 5

LR White Resin 500g - Uncatalysed version

This is a hydrophilic acrylic resin of low viscosity with wide applications suitable for both light and electron microscopy.

ID 51-1625-0521

£ 103.53

Pre Order Now

Magic Tape

Magic Tape 12mm x 66m. Matt adhesive tape which becomes transparent when affixed. This tape becomes virtually invisible when applied, and has a whole range of uses in the lab.

ID 51-1625-0897

£ 10.45

In Stock 2

Magnet switch heater cable (59-CWA0451)

Magnet switch heater cable used to energise the superconducting switch heater when the main solenoid coil is being energised/de-energised.

ID SP-139

£ 172.20

£ 246.00

In Stock 1

MAGSHIELD G3 GASCHECK (59-VEZ0052)

The GasCheck handheld helium gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels.

ID SP-007

£ 5,322.00

Pre Order Now

Melinex Film (5 Pack)

Melinex® film is a convenient substrate for growing cell cultures and for later incorporation into blocks. Pack of 5 sheets.

ID 51-1625-0835

£ 29.96

Pre Order Now

Membrane Box 200mm x 200mm x 50mm

Singular clear polystyrene membrane box containing thin Platilon membranes, ideally used for the safe transit of small, delicate objects such as semiconductors, crystals, wafers, crystal substrates, and optical components. Single box with hinged lid and locking lips - Membrane Box 200mm x 200mm x 50mm

ID 51-1625-0868

£ 25.43

In Stock 2

Membrane Boxes (Square)

Membrane Boxes 55x55x25mm (Pack of 10) with push fit lids. A pack of 10 clear polystyrene boxes containing thin Platilon membranes.

ID 51-1625-0132

£ 56.23

In Stock 6

Membrane Box - Round

Clear polystyrene boxes containing thin Platilon membranes, ideal for the safe transit of delicate objects. This comes with 4 clips.

ID 51-1625-0854

£ 15.09

In Stock 2

MERCURY Assembly Pressure Sensor Card (59-PNV0007)

Pressure sensor card for Mercury intruments - Plug and go card for Oxford Instruments Mercury Instrumentation. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID SP-015

£ 817.00

In Stock 3

MERCURY-CD-AUX Auxiliary card for MercuryiTC temperature controller (59-PNV0005)

Auxiliary card for Mercury intruments. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-413

£ 332.00

In Stock 3

MERCURY-CD-GPIB GPIB interface card for Mercury instruments (59-PNV0004)

GPIB interface card for Mercury instruments ITC and IPS systems. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-414

£ 545.00

In Stock 2

MERCURY-CD-H Additional 80W heater card for Mercury instruments (59-PNV0002)

Additional 80W heater card for Mercury instruments for Mercury ITC only. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-412

£ 404.00

In Stock 3

MERCURY-CD-L Cryogen level metering card for Mercury instruments (59-PNV00030

Cryogen level metering card for Mercury instruments ITC and IPS units. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-415

£ 1,302.00

In Stock 1

MERCURY-CD-S Additional single temperature sensor input channel card for Mercury instruments (59-PNV0001)

Additional single temperature sensor input channel card for Mercury instruments. Customisation is possible through the addition of plug and play expansion cards. The controller features 9 expansion slots (8 multi-function slots and a dedicated GPIB slot) which can be used to extend its capability.

ID E3-411

£ 575.00

In Stock 1

MERCURY-IPS-120 Mercury IPS120 A 10V superconducting magnet power supply (59-E1-120)

MERC-IPS-120 MercuryIPS 120 A 10 V superconducting magnet power supply. The Mercury iPS is configurable and is made up of two units: The Mercury main unit E1-060 and Mercury secondary slave unit E1-061.

ID E1-120

£ 13,481.00

In Stock 2

MercuryIPS 60A 10V superconducting magnet power supply (59-CQW0000)

MercuryIPS 60A 10V superconducting magnet power supply master unit using the same platform as the MercuryiTC temperature controller. It offers best in class stability performance (less than +/- 2.8 mA at 120 A).

ID E1-060

£ 7,805.00

In Stock 2

MercuryIPS 60A superconducting magnet power supply. slave unit (59-CQX0000)

MercuryiPS 60A 10V intelligent superconducting magnet power supply slave unit for the control of cryogenic and magnetic environments.

ID E1-061

£ 5,676.00

In Stock 1

MERCURY-ITC-1 MercuryiTC temperature controller configured with one PID loop (59-CQV0000)

MercuryiTC temperature controller base unit configured with one PID loop. The MercuryiTC is a versatile cryogenic environment controller. In its basic form it includes a single channel high-resolution (24 bit) temperature measurement circuit which supports all the standard cryogenic sensors.

ID E3-101

£ 2,649.00

In Stock 12

Mercury Pressure Monitoring Upgrade KIT (59-Z40712)

Mercury pressure monitoring upgrade kit for MercuryiTC or MercuryiPS master. Please note image is for illustration purpose only.

ID SP-085

£ 1,960.00

Pre Order Now

Metal Cryo Grid Box

Metal grid storage boxes designed for use in cryogenic conditions.

ID 51-1625-0402

£ 43.58

Pre Order Now

MICA DISK, 15MM, V1

High quality V1 muscovite mica disks - pack of 20
15mm diameter, 0.15mm thick

ID 080.172

£ 148.08

Pre Order Now

Mica Sheets (Rectangular, 20 Pack)

Freshly cleaved ruby muscovite mica surfaces are extremely even and flat. Mica Sheets 75mm x 25mm x 0.15mm thick (Rectangular - Pack of 20). Cleaving mica involves insertion of a sharp edge or point into an edge or corner of the sheet and gently prying apart the leaves. A good sharp razor blade edge will do the job and in some cases a sharp pointed tweezer may accomplish this.

ID 51-1625-0233

£ 50.69

£ 72.41

In Stock 1

Micrometer

This micrometer (0 to 25mm) has tungsten carbide measuring faces with a hard satin chrome spindle, and a sleeve with very fine graduations for accurate reading.

ID 51-1625-0776

£ 62.80

Pre Order Now

Micro Pipettes, intraMARK (Pk 250)

Glass micropipettes, that come with a with ring mark for volumetric measurements. They contain the stated volume when filled from one end to the ring mark for volumetric precise measurements.

ID 51-1625-0477

£ 88.75

Pre Order Now

MicrostatHe rectangular tail set with 4 x Spec B windows (59-Z40734)

MicrostatHe2 rectangular tail set providing four optical access ports fitted with Spec B windows.

ID SP-009

£ 3,812.00

In Stock 2

Microstat He Reflection Mounting Plate (59-DVO0092)

Microstat He Reflection Mounting Plate

ID A9-902

£ 308.00

Pre Order Now

Microstat He Square (narrow) tailset, fitted with 4 x Spec WF windows (59-A-ZSX1209)

Microstat He Square tailset fitted with 4 x Spec WF windows.

ID SP-003

£ 3,297.00

Pre Order Now

Microstat He Transmission Mounting Plate (59-DVO0093)

Microstat He Transmission Mounting Plate 10mm or 25mm

ID A9-901

£ 308.00

Pre Order Now

Microstat He Window Flange

Microstat He Window Flange, Spec B, 10mm x 0.5mm (QOVC05M2)

ID A9-801

£ 438.00

In Stock 1

Microstat Hi Res/Hi Res 2 Bottom Plate

Microstat HR2 Bottom Plate With Spec WF 25mm Clear Access (WOVCB15HR2). Replacement bottom window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Spec WF window.

ID A9-939

£ 701.00

Pre Order Now

Microstat HR2 Blank Base Plate - BBPHR2 (59-P160270)

Microstat HR2 Blank Base Plate (BBPHR2). Replacement Microstat HiRes / HiRes2 blank base plate, fitted with 0.5mm thick Spectrosil B window.

ID A9-938

£ 176.00

Pre Order Now

MicrostatHR2 Circular transmission mounting plate (59-P280646)

MicrostatHR2 Circular transmission mounting plate.

ID SP-020

£ 546.00

£ 780.00

In Stock 1

MicrostatHR2 Rectangular transmission mounting plate (59-P271008)

MicrostatHR2 Rectangular transmission mounting plate

ID SP-021

£ 369.00

Pre Order Now

Microstat HR2 Top Plate With Crystalline Z-cut Quartz 25mm Clear Access (59-A9-943)

Microstat HR2 - Top Plate With Crystalline Z-cut Quartz 25mm (Clear Access). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Crystalline Z-cut Quartz window.

ID A9-943

£ 916.00

Pre Order Now

Microstat HR2 Top Plate With Sapphire 10mm Clear Access - SOVC05HR2 (59-A9-932)

Microstat HR2 Top Plate With Sapphire 10mm Clear Access (SOVC05HR2) Replacement top window plate for Microstat HiRes / HiRes2.

ID A9-932

£ 1,124.00

Pre Order Now

Microstat HR2 Top Plate With Sapphire 25mm Clear Access - SOVC15HR2 (59-A9-936)

Microstat HR2 Top Plate With Sapphire 25mm Clear Access (SOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Sapphire window.

ID A9-936

£ 1,224.00

Pre Order Now

Microstat HR2 Top Plate With Spec B 10mm Clear Access - QOVC05HR2 (59-A9-930)

Microstat HR2 Top Plate With Spec B 10mm Clear Access (QOVC05HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 0.5mm thick Spectrosil B window.

ID A9-930

£ 566.00

In Stock 4

Microstat HR2 Top Plate With Spec B 25mm Clear Access - QOVC15HR2 (59-A9-934)

Microstat HR2 Top Plate With Spec B 25mm Clear Access (QOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Spectrosil B window.

ID A9-934

£ 432.00

In Stock 4

Microstat HR2 Top Plate With Spec WF 10mm Clear Access - WOVC05HR2 (59-A9-931)

Microstat HR2 Top Plate With Spec WF 10mm Clear Access (WOVC05HR2)

ID A9-931

£ 704.00

Pre Order Now

Microstat HR2 Top Plate With Spec WF 25mm Clear Access - WOVC15HR2 (59-A9-935)

Microstat HR2 Top Plate With Spec WF 25mm Clear Access (WOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick Spectrosil WF window.

ID A9-935

£ 715.00

Pre Order Now

Microstat HR2 Top Plate With ZnSe 10mm Clear Access - ZOVC05HR2 (59-A9-942)

Microstat HR2 Top Plate With ZnSe 10mm Clear Access (ZOVC05HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 0.5mm thick ZnSe window.

ID A9-942

£ 2,077.00

Pre Order Now

Microstat HR2 Top Plate With ZnSe 25mm Clear Access - ZOVC15HR2 (59-A9-933)

Microstat HR2 Top Plate With ZnSe 25mm Clear Access (ZOVC15HR2). Replacement top window plate for Microstat HiRes / HiRes2, fitted with 1.5mm thick ZnSe window.

ID A9-933

£ 1,309.00

Pre Order Now