LLT600/13 - A Low Loss Transfer tube (LLT) for horizontal feed cryostats: 1.3m Dewar Leg, 1.2m Flexible Section.
Pfeiffer gauge upgrade kit for Triton control rack: replaces Leybold center 3 and Leybold pressure gauges OVC, P3 and P4.
RF Subminature Coaxial Socket SMB, Straight suitable for ECO316, ECO316D, RG174, RG174FTX, RG179, RG187, RG188 and RG316 cable.
Indium Wire 1.0mm Dia (Supplied by the metre)
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
LLT600/13 - A Low Loss Transfer tube (LLT) for horizontal feed cryostats: 1.3m Dewar Leg, 1.5m Flexible Section
A sintered main impedance used on a Triton dilution refrigerator. Stainless steel, 9sccm.
Nitrogen Cold Trap NW KF 16mm fittings - This cold trap removes impurities such as air and moisture from helium gas circulating in a Kelvinox dilution refrigerator or other processes.
Mounted 10-Pin Seal. Hermetically sealed connector that can be mounted into housing A1-103. Useful in high pressure applications.
Auto Needle Valve Upgrade Kit, for use with the LLT transfer tubes, enables automated cryogen flow control.
Apiezon Hydrocarbon wax which can be used as permanent or semi-permanent vacuum sealants or mounting media. Apiezon waxes are equally effective at maintaining seals in vacuum systems down to 10-9 torr at 20°C (dependent on the wax) and in systems at small positive pressures. They are excellent waterproof mediums providing a total seal against liquid water and offer superior sealing against water vapour and atmospheric moisture.
LLT600/13 - A Low Loss Transfer tube (LLT) for horizontal feed cryostats: Transfer Tube: 1.3m Dewar Leg, 1.8m Flexible Section
Cryogenic Ribbon Cable Loom 7, Constantan
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
10-Pin Fischer Plug hermatic - Female which is compatible with A1-206. 10 Pin contacts with a diameter of 0.7mm.
4-Pin Fischer Plug - Female. Compatible with A1-208, 4 Pin contacts diameter 0.9mm, Rated voltage r.m.s. (V) ≤250, Current (A): 7
Knurled Nut for 10-Pin Connector Housings to be used in vacuum applications.
LLT700/10 - A Low Loss Transfer Tube for vertical feed cryostats: 1.0m Dewar Leg, 1.3m Flexible Section.
10-Pin Fischer Plug: Male - Compatible with A1-216. This plug has 10 Pin contacts and a diameter of 0.7mm.
Special TTN2F Helium transfer tube manufactured to customer specified dimensions - custom lengths available.
Hood for 10-Pin Plug Socket that easily fits on to any 10 pin male or female connector.
Triton high pressure Ln2 cold trap with quick connectors to be used in vacuum applications.
General Purpose Transfer Tube TTN2F Standard Flexible, 0.5M Dewar Leg. Compatible with dewar top fitting SV10. 0.5m Dewar leg, Typical flow rates of 1l/min at 0.1bar.
Fischer 27 Pin DBEE105A Receptacle 27 way socket (hermatic)
Compressor Adsorber Cryomech (Compressor Model CP2800). This model is compatible with the CP2800. These modules clean the helium gas flow using dehydrated charcoal, glass, wool, and felt.
Polythene Olives for sealing tubes in compression fittings 15.9mm diameter
(Sold in a pack of 10)
Helium cold Trap 1.1mtr 3/8 diameter - absorbs gases and impurities that can not be absorbed by a nitrogen cold trap.
SMA socket to socket hermetic Bulk Head Adapter. (Feedthrough jack to jack)
Blanking Plate for BNC Socket to ensure protection from dust and moisture.
10-Pin Fischer Plug hermatic - Female - Compatible with A1-215.
Panel, Front mounted. 10 Pin Nbr contacts dia 0.7mm, Rated voltage r.m.s. (V) ≤250, Current (A): 4.5
10 Pin Seal Blanking Plate to protect from dust and moisture.
This simple, yet effective stainless steely dipstick provides accurate indication of liquid helium depth.
Liquid nitrogen side arm for transferring LN2 into continuous flow (CF) cryostats. For use with a Microstat and Optistat
Aeroquip Fitting - Flat Gasket end (22008-8). Aeroquip fittings and adaptors are used when working with high pressures and temperatures and they provide durability and a longer life expectancy.