New

1% Ethyl Benzene standard sample supplied in a sealed degassed 5mm diameter NMR tube.

10mm diameter x 200mm length, long glass tubes supplied in a box of 75

Delrin tool for removing 18mm and 26mm stoppers from FEP tube assemblies.

Extended 18mm diameter FEP sample tube with PTFE end plugs.

18mm diameter x 200mm long glass tubes, supplied in a box of 50.

18mm diameter FEP sample tube with PTFE end plugs

18mm diameter sealed NMR tube. To measure hydrogen signal.

20% Chloroform Standard Sample, supplied in a sealed degassed 5mm diameter NMR tube.

23mm Flat Bottom Snap Top Vials, supplied in a box of 190. Caps are supplied separately.

22mm diameter PTFE sample. To measure fluorine signal.

Extended 26mm diameter FEP sample tube with PTFE end plugs.

Polypropylene plug to pack the sample to the correct height.

26mm diameter X 200mm long glass tubes, supplied in a box of 25.

26mm diameter FEP sample tube with PTFE end plugs for use with the MQC-23.

A set of 4 synthetic calibration maintenance samples. 26mm in diameter.

26mm sealed NMR tube used to measure hydrogen signal.

PTFE tool for removing the 26mm Stopper.

PTFE tool for inserting and removing the 26mm PTFE/FEP Sample Cartridges.

PTFE tool for packing sample to the correct height in the sample vial.

40mm diameter sealed NMR tube.

50mm diameter sealed NMR tube filled with light mineral oil.

50mm diameter x 220mm long glass tubes supplied in a box of 5.

80% Benzene in Acetone standard sample supplied in a sealed degassed 5mm diameter NMR tube.

NOTICE: This product is a direct replacement to the discontinued Adama Innovations AD-40-AS

With an apex sharp conductive single crystal diamond tip for high resolution topography and electrical imaging with long tip lifetime. Each pack contains 5 probes.

Caps for use with the 23mm snap top vials (57-LE1011) supplied in a bag of 190.

Premium 8" long, 5mm diameter NMR tubes, 200MHz frequency, supplied in a pack of 50 with caps.

Aluminium conditioning block to fit 18mm diameter tubes in 12 spaces.

Aluminium conditioning block to fit 23 x 18mm diameter vials.

Aluminium conditioning block to fit 10mm diameter tubes. It has 10 spaces for 26mm diameter tubes.

Aluminium conditioning block to fit 26mm diameter tubes in 12 spaces.

Aluminium conditioning block to fit 26mm diameter vials.

Aluminium conditioning block to fit 26mm diameter tubes. It has 25 spaces for 26mm diameter tubes, 5 spaces for 18mm diameter tubes.

Aluminium conditioning block to fit 26mm diameter tubes in 28 spaces.

Aluminium conditioning block to fit 26mm diameter vials in 28 spaces.

A Doped Water standard sample supplied in a sealed degassed 5mm diameter NMR tube.

This product is a direct replacement to the discontinued Kelvin Nanotechnology KNT-STHM.

NOTICE: This product is recommended for qualitative or relative measurements of variations in local temperature or thermal conductivity up to 150 C. It is not recommend for quantitative or accurate local temperature measurements, especially exceeding 60 C, as results are generally inconsistent even if calibration is attempted against known sample temperatures.​

This simple, yet effective stainless steely dipstick provides accurate indication of liquid helium depth.

Microfleece Pipe Cleaners sold in a pack of 50, 9mm diameter.

PTFE spacer to set the correct height of sample in the NMR probe.

PTFE tool for removing the spacer from the NMR probe.

10mm diameter sealed NMR tube. To measure hydrogen signal.

PTFE tool for inserting and removing the 18mm PTFE/FEP Sample Cartridge.

A PTFE spacer for use with the 18mm LVT probe.

18mm diameter sealed NMR tube. To measure hydrogen signal.

A set of 2 synthetic calibration samples and 1 tuning sample. 50mm in diameter.

A PTFE spacer for use with the 51mm probe.

23mm diameter x 85mm long borosilicate glass vials, supplied in a box of 144.

17mm diameter x 38mm long borosilicate glass vials, supplied in a box of 200.

NMR tubes 4mm diameter, 8 inches plus caps. Sold in a 25 pack.