Pfeiffer gauge upgrade kit for Triton control rack: replaces Leybold center 3 and Leybold pressure gauges OVC, P3 and P4.
Indium Wire 1.0mm Dia (Supplied by the metre)
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
LLT600/13 - A Low Loss Transfer tube (LLT) for horizontal feed cryostats: 1.3m Dewar Leg, 1.5m Flexible Section
RF Subminature Coaxial Socket SMB, Straight suitable for ECO316, ECO316D, RG174, RG174FTX, RG179, RG187, RG188 and RG316 cable.
A sintered main impedance used on a Triton dilution refrigerator. Stainless steel, 9sccm.
Mounted 10-Pin Seal. Hermetically sealed connector that can be mounted into housing A1-103. Useful in high pressure applications.
Nitrogen Cold Trap NW KF 16mm fittings - This cold trap removes impurities such as air and moisture from helium gas circulating in a Kelvinox dilution refrigerator or other processes.
Auto Needle Valve Upgrade Kit, for use with the LLT transfer tubes, enables automated cryogen flow control.
Apiezon Hydrocarbon wax which can be used as permanent or semi-permanent vacuum sealants or mounting media. Apiezon waxes are equally effective at maintaining seals in vacuum systems down to 10-9 torr at 20°C (dependent on the wax) and in systems at small positive pressures. They are excellent waterproof mediums providing a total seal against liquid water and offer superior sealing against water vapour and atmospheric moisture.
LLT600/13 - A Low Loss Transfer tube (LLT) for horizontal feed cryostats: Transfer Tube: 1.3m Dewar Leg, 1.8m Flexible Section
Cryogenic Ribbon Cable Loom 7, Constantan
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
10-Pin Fischer Plug hermatic - Female which is compatible with A1-206. 10 Pin contacts with a diameter of 0.7mm.
4-Pin Fischer Plug - Female. Compatible with A1-208, 4 Pin contacts diameter 0.9mm, Rated voltage r.m.s. (V) ≤250, Current (A): 7
Knurled Nut for 10-Pin Connector Housings to be used in vacuum applications.
LLT700/10 - A Low Loss Transfer Tube for vertical feed cryostats: 1.0m Dewar Leg, 1.3m Flexible Section.
Special TTN2F Helium transfer tube manufactured to customer specified dimensions - custom lengths available.
10-Pin Fischer Plug: Male - Compatible with A1-216. This plug has 10 Pin contacts and a diameter of 0.7mm.
Hood for 10-Pin Plug Socket that easily fits on to any 10 pin male or female connector.
Fischer 27 Pin DBEE105A Receptacle 27 way socket (hermatic)
Polythene Olives for sealing tubes in compression fittings 15.9mm diameter
(Sold in a pack of 10)
Helium cold Trap 1.1mtr 3/8 diameter - absorbs gases and impurities that can not be absorbed by a nitrogen cold trap.
Blanking Plate for BNC Socket to ensure protection from dust and moisture.
Cryogenic Ribbon Cable Loom 9, NbTi is a loom made up of 2 strands of 36swg Copper, and 4 strands of 40swg Copper
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
Transfer tube entry coupling for connecting a transfer tube to a continuous flow cryostat.
LLT650/10 - An Automated Low Loss Transfer Tube with automatic needle valve control option: 1.0m Dewar Leg, 1.2m Flexible Section
Cryogenic Ribbon Cable Loom 8, NbTi is a loom containing 12 twisted pairs of 42swg NbTI wires.
Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.
LLT650/13 - An Automated Low Loss Transfer Tube with automatic needle valve control option:: 1.3m Dewar Leg, 1.2m Flexible Section
24-Pin Fischer Plug - Male which is compatible with A1-204. 24 Pin Nbr contacts diameter 0.7mm, Rated voltage r.m.s. (V) ≤250, Current (A): 3.5
PTFE Sealing Olives for use with LLT and TTL Transfer Tubes - to be fitted to the cryostat end of a LLT continuous flow transfer tube.
Cryogenic Ribbon Cable Loom 3, NbTi with Male and female 25 way MDM connectors
Connector Housing (for 10-Pin Fischer connectors). A Fischer Connector housing provide mechanical support for the contact members.
7-Pin Fischer Plug - Female, which is compatible with A1-210. 4 Pin contacts diameter 0.9mm, Rated voltage r.m.s. (V) ≤250, Current (A)
10-Pin Fischer socket hermatic - Male which is compatible with A1-205. This socket has 10 Pin contacts with a diameter of 0.7mm.
Standard Nitrogen Probe with Fischer 3-pin connector - The stainless steel probe tube is a coaxial capacitive sensor.
Aeroquip Fitting - Dust Plug (5400-S8-8) An end coupling for Aeroquip, used in Helium recirculation systems. Aeroquip fittings and adaptors are used when working with high pressures and temperatures and they provide durability and a longer life expectancy.
Cryogenic Ribbon Cable Loom 1, Constantan with Male 25 way MDM connector.