Grids

MODULE ASSY - MICS F+

EDS/ EBSD Microscope Image Capture module MICS F+

Product ID: 51-G-1100-149

For availability and prices please request a quote.

In Stock 1

X4 MAIN ASSEMBLY

X4 EDS multiple Detectors pulse processing and control unit combined with image capture module

Product ID: 51-G-1100-173

For availability and prices please request a quote.

In Stock 1

Centring Ring with Viton 'O'-Ring, 10mm (used in vacuum applications)

NW/KF 10mm Centring Ring with Viton 'O-ring

Product ID: A4-201

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 19.00

In Stock 5

AR10T-NCH

Silicon probe with high aspect ratio (>10) tip for deep trench imaging.

Each pack contains 10 probes.
This product is not in stock but you can order it and it will take around two weeks to get delivered.

Product ID: 804.NS.AR10T-NCH

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 1,853.00

Pre Order Now

Pfeiffer gauge upgrade kit for Triton control rack

Product ID: SP-010

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 6,463.00

Pre Order Now

Molybdenum Spray Aperture 12.68 x 0.25mm Hole 1500um

Used in Cambridge/LEO/Zeiss and Camscan scanning electron microscopes.

Aperture diameter 12.68mm, thickness 0.25mm.

Product ID: 51-1625-0001

€ 157.00

Pre Order Now

AFM Consultation: 3 Days (Customer Site - US/Canada)

Three days of AFM Consultation / Training at the Customer Site.

Basic training includes: Hardware/software overviews, common troubleshooting and maintenance, topographic imaging in contact and AC (Tapping) modes, basic force measurements, cantilever calibration, basic image modification/ analysis.

Please pick a preferred date for your order. Final dates of service are subject to change upon discussion between customer and Asylum Research staff.

Product ID: AFM03-003

€ 8,549.00

Indium Wire 1.0mm Dia (Supplied by the metre)

Indium Wire 1.0mm Dia (Supplied by the metre)

Please note: The quantity you select of this item is equivalent to the amount in metres that you will receive. For example: If you select quantity: 2, you will receive 2 metres.

Product ID: C4-102

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 33.00

Out of stock

ISO100 K-F ADAPTOR FLANGE

ISO 100 K-F Adaptor flange

Product ID: SP-070

€ 205.00

Pre Order Now

LLT600/13 - Transfer Tube: 1.3m Dewar Leg, 1.5m Flexible Section

Product ID: H7-309

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 4,374.33

Pre Order Now

DDSA (Dodecenyl Succinic Anhydride) EM grade redistilled 500

DDSA can be used as a hardener that facilitates the curing the of epoxy resin.

Product ID: 51-1625-0225

€ 72.00

Out of stock

TKD EBSD sample holder

TKD sample holder designed to be used together with the standard universal pre-tilted sample holder supplied with the Aztec EBSD system.

Product ID: 51-1120-408

€ 670.00

Out of stock

NCST

Silicon probe with no reflex coating for soft tapping mode.

Each pack contains 10 probes. This product is not in stock but you can order it and it will take around two weeks to get delivered.

Product ID: 804.NW.NCST

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 285.00

Pre Order Now

Microstat N Top Window with Spec B 25mmx1.5mm

Product ID: A9-813

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 630.25

Pre Order Now

ATEC-CONTAu

Conductive silicon probe with visible tip apex for contact mode electrical measurements.

Each pack contains 10 probes. This product is not in stock but you can order it and it will take around two weeks to get delivered.

Product ID: 804.NS.ATEC-CONTAU

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 763.00

Pre Order Now

Co-axial Socket

Product ID: A1-115

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 42.00

Pre Order Now

Molybdenum boats for aperture cleaning

These boats accommodate several aperture discs which should be heated in a vacuum chamber to bright red heat for cleaning.

Product ID: 51-1625-0185

€ 43.00

Pre Order Now

TL-FM

Tipless cantilever for special applications where no tip is needed.

Each pack contains 10 probes. This product is not in stock but you can order it and it will take around two weeks to get delivered.

Product ID: 804.NS.TL-FM

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 297.00

Pre Order Now

4-hole Cryo-EM Round Storage Box to fit FEI Vitrobot

4-hole Cryo-EM storage box to fit FEI Vitrobot.

Product ID: 51-1625-0195

€ 18.00

In Stock 10

Flexible Line NW16 Fittings 3metre

Flexible Pumping Line NW16 Fittings 3metre

Product ID: C1-903

€ 257.00

In Stock 2

Centring Ring with Viton 'O'-Ring, 25mm (used in vacuum applications)

NW/KF 25mm Centring Ring with Viton 'O-ring

Product ID: A4-202

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 17.00

In Stock 8

Replacement NMR O-ring Set: D15000 54mm

Replacement NMR O-ring set for the D15000 system.

Product ID: N3-104

€ 387.00

Pre Order Now

Flexible Line NW40 Fittings 2metre

Flexible Pumping Line NW40 Fittings 2metre

Product ID: C1-908

€ 322.00

Pre Order Now

SSS-FMR

Silicon probe with sharp tip for high resolution imaging in force modulation mode.

Each pack contains 10 probes.
This product is not in stock but you can pre order and it will take around two weeks to get delivered

Product ID: 804.NS.SSS-FMR

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 701.00

Pre Order Now

Quantifoils 2um dia (2um) 400 Mesh Gold (Pack of 10)

Quantifoil 2um dia (2um) 200 Mesh Copper (Pack of 10)

Product ID: 51-1625-0065

€ 146.00

In Stock 1

Triton Vector Rotate Magnet leads (single coil) 2 x 6.5mmØ Clamp 6mtr 120amp

Product ID: SP-142

€ 452.00

Pre Order Now

Sintered impedance 9 SCCM

Product ID: SP-040

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 516.00

Pre Order Now

Thin Foil Aperture 3.04mm dia x 0.25mm thick, Hole 30um

Thin film apertures are frequently used in the objective lenses of high resolution and electron beam lithography instruments.

Product ID: 51-1625-0264

€ 161.00

Pre Order Now

UltrAuFoil R0.6 / 1 on 300 mesh Gold (Pack of 10)

UltrAuFoil® - ultra-stable gold supports for electron cryomicroscopy.
These recently developed ultra-stable gold supports for electron cryomicroscopy reduce the movement of frozen specimens during imaging.

Product ID: 51-1625-0115

€ 305.00

Out of stock

CF filter kit excluding Zeolite

Product ID: SP-134

€ 588.00

In Stock 5

Microstat He Window Flange, Spec B, 10mm x 0.5mm (QOVC05M2)

Product ID: A9-801

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 476.51

Pre Order Now

Mounted 10-Pin Seal

Product ID: A1-110

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 65.37

In Stock 11

Oil Mist Eliminator OME 25 HP

Oil Mist Eliminator OME 25 HP *Replacement Filter Cartridge*

Product ID: SP-137

€ 39.00

Pre Order Now

Vacuum Sample Support Tube (old style)

ESR Vacuum Sample Support Tube (old style)

Product ID: A5-202

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 233.00

Pre Order Now

AP300/400 tips for in-situ tip change (box of 20)

A box of 20 In-situ probe tips - they have a tungsten tip with a stainless steel shank for use with the AutoProbe™ 300.

Product ID: PT-0001.03.01

€ 483.00

Quantity Discounts

Buy 5-9 items (€ 410.55 each)
Buy 10+ items (€ 362.25 each)

In Stock 13

TEM Grids 400 Mesh Copper 3.05mm (Tube of 100)

3.05mm diameter, square mesh copper TEM grids. Available in 50, 75, 100, 150, 175, 200, 250, 300, 400 and 600 mesh sizes. Supplied in tubes of 100.

Product ID: 51-1625-0096

€ 30.00

Pre Order Now

Molybdenum Aperture 2mm dia x 0.1mm Hole 500um

2mm diameter, 0.6mm thick.

Molybdenum. High quality disc apertures for use in electron microscopes, Focus Ion Beam, microprobe and X-ray systems.

Product ID: 51-1625-0345

€ 137.00

Pre Order Now

KNT-STHM

Each pack contains 5 probes. This product is not in stock but you can order it and it will take around two weeks to get delivered.

The KNT (Kelvin Nanotechnology) scanning thermal microscopy probe is a batch fabricated AFM probe for best in class simultaneous topography and temperature/thermal conductivity mapping. The probe offers excellent flexibility and with a low spring constant Si3N4 cantilever for easy scanning and high resolution.

Product ID: 812.KNT.STHM

Summer Savings - Buy any 2 AFM Probes and save 10%

€ 1,872.00

Pre Order Now

Nitrogen Cold Trap NW/KF16

Nitrogen Cold Trap NW KF 16mm fittings

Product ID: H6-103

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 1,740.00

In Stock 2

Quantifoil 2um dia (4.0um) 400 Mesh Copper 10 Pk

Quantifoil 2um dia (4.0um) 200 Mesh Copper 10 Pk

Product ID: 51-1625-0082

€ 128.00

Pre Order Now

Auto Needle Valve Upgrade Kit

Product ID: H7-050

Summer Savings - Purchase any 3 products from Cryospares or Optical & Spectroscopy categories and save 15%

€ 1,209.00

In Stock 1

Adhesive Carbon Tape 12mm x 20m

A high quality, very electrically conductive carbon adhesive tape with a thin aluminium foil (30µm) core suitable for SEM or EDX applications. 12mm x 20m

Product ID: 51-1625-0228

€ 83.00

In Stock 4

Gold Disc Target, 57mm dia x 0.1mm, Coater Type 1

A range of spare targets is available for most well known makes of sputter coaters.

Product ID: 51-1625-0360

€ 681.00

In Stock 6

AZtec EDS Analysis

A 3 day remote training course for 3 hours per day on our Aztec EDS system allowing best practise analysis and interpretations of results. The course will be held through Skype video call and time for each day will be agreed with participant. we will provide with all material needed.

For full course information click here

Please book your course at least 3 weeks before the start date to give us enough time to arrange. Courses are for customers who have used the systems for a while, have basic operational knowledge rather than completely new users.

Product ID: OIRT01-0001

Spring Savings - 10% off NanoAnalysis Training courses

€ 1,775.00

NS.PtSi-CONT

Silicon probe with PtSi coating for contact mode.

Each pack contains 10 probes. This product is not in stock but you can order and it will take around two weeks to get delivered.

Product ID: 804.NS.PtSi-CONT