4 post Moly lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations, two with vertical bar attachment surfaces and two with V shaped alighment surfaces.
Omniprobe® Lift-Out Grids are specifically designed to accept the TEM lamellas milled out by FIB or SEM/FIB systems. The grid sides have lower profile for easier access to outermost posts. They have a 3mm diameter and are Packaged in glassline envelopes.
The Omniprobe® grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts.
Diameter : 3mm Thickness (nominal) : 30 μm
Post Downset (nominal) : 10 um
Unique Feature : Top DS Only
Posts | Material | Thickness (Nominal) Microns |
Nominal Post Downset Microns |
Unique Feature |
3 | Copper | 30 | 10 | — |
3 | Molybdenum | 30 | 10 | Top Downset Only |
0 | Berylium | 25 | N/A | Half Ring |
5 | Copper | 40 | 10 | 5th Post is "E" |
4 | Copper | 30 | 10 | — |
4 | Molybdenum | 30 | 10 | Top DS Only |
3 | Copper | 30 | 5 | Side Access |
3 | Copper | 30 | 5 | — |
5 | Copper | 35 | 5 | 5th Post is "E" |
4 | Copper | 30 | 5 | — |